OK finaly got the board (the right one :) ) . I have burned latest ArcEye's
image from:
http://blog.machinekit.io/2016/11/de0-nano-soc-update-on-sd-card-images.html
to the SD card, I haven't troubled to extend rootfs partition.
This is what I get when starting my adapted ini and hal:
machinekit@mksocfpga:/lib/firmware/socfpga/dtbo$ machinekit
~/machinekit/configs/hm2-soc-stepper/MKSOCFPGA.ini
MACHINEKIT - 0.1
Machine configuration directory is
'/home/machinekit/machinekit/configs/hm2-soc-stepper'
Machine configuration file is 'MKSOCFPGA.ini'
Starting Machinekit...
io started
halcmd loadusr io started
MKSOCFPGA.hal:34: insmod failed, returned -1:
Unknown parameter
`config=firmware=socfpga/dtbo/DE0_Nano_SoC_DB25.7I76_7I76_7I76_7I76.dtbo
num_encoders=2 num_stepgens=4'
See /var/log/linuxcnc.log for more information.
Shutting down and cleaning up Machinekit...
Cleanup done
Machinekit terminated with an error. You can find more information in the
log:
/home/machinekit/linuxcnc_debug.txt
and
/home/machinekit/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal
My configs are here:
https://github.com/zhivko/machinekit/blob/master/myini/MKSOCFPGA.ini
and
https://github.com/zhivko/machinekit/blob/master/myini/MKSOCFPGA.hal
What would "*Unknown parameter*" mean? What am I missing?
Dne sreda, 01. februar 2017 10.31.06 UTC+1 je oseba Schooner napisala:
>
> Just to clarify, because there are a plethora of different kits and boards
> with similar names etc.
>
> The DE0-NANO-Soc we used is the PO286-ND
>
> http://www.digikey.co.uk/product-detail/en/P0286/P0286-ND/5222193?WT.mc_id=IQ_7628_G_pla5222193&wt.srch=1&wt.medium=cpc&WT.srch=1&mkwid=s&pcrid=106285396226&pkw=&pmt=&pdv=c
>
> I inadvertently referred to another kit at £67, this correct one is £83
> from Digikey, which appears to be the cheapest available,
> with Mouser a few £ more
>
> On Friday, 27 January 2017 14:42:45 UTC, Klemen Zhivko wrote:
>>
>> Does anybody know where in Europe I can buy de0 nano soc (Cyclone 5 i
>> think).
>> I would like to control 3 servos - with machinekit.
>> Are stepper and servo configuration posibble on machinekit (on de nano
>> soc) ?
>>
>> regards
>>
>
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
