Re: [Machinekit] Re: de0 nano soc for MK

[schoone...@btinternet.com]

Run the sim first If that works, it is your configuration If it doesn't, there is something screwy with your image, works fine here I should have a working image before too long to post for download, just compressing the hell out of it at present You don't need root for anything On 14/02/17 16:50, Klemen Zhivko wrote: OK it completed with -j2 without problem - there is wnother error now present in command line I get: machinekit@mksocfpga:~$ machinekit ~/myconfig/mksocfpga.ini MACHINEKIT - 0.1 Machine configuration directory is '/home/machinekit/myconfig' Machine configuration file is 'mksocfpga.ini' Starting Machinekit... io started halcmd loadusr io started mksocfpga.hal:40: rc=-1: hal_call_usrfunct(newinst,-- config="firmware=socfpga/dtbo/DE0_Nano_SoC_DB25.7I76_7I85S_GPIO_GPIO.dtbo num_stepgens=4 num_encoders=1 num_mencoders=4") failed: -1 - Operation not permitted Shutting down and cleaning up Machinekit... Cleanup done Machinekit terminated with an error.  You can find more information in the log:     /home/machinekit/linuxcnc_debug.txt and     /home/machinekit/linuxcnc_print.txt as well as in the output of the shell command 'dmesg' and in the terminal machinekit@mksocfpga:~$ DEBUG=5 machinekit@mksocfpga:~$ export DEBUG=5 machinekit@mksocfpga:~$ machinekit ~/myconfig/mksocfpga.ini MACHINEKIT - 0.1 Machine configuration directory is '/home/machinekit/myconfig' Machine configuration file is 'mksocfpga.ini' Starting Machinekit... io started <commandline>:0: Component 'iocontrol' ready <commandline>:0: Program 'io' started halcmd loadusr io started mksocfpga.hal:29: Realtime module 'trivkins' loaded mksocfpga.hal:33: Realtime module 'tp' loaded mksocfpga.hal:37: Realtime module 'hostmot2' loaded mksocfpga.hal:40: Realtime module 'hm2_soc_ol' loaded mksocfpga.hal:40: rc=-1: hal_call_usrfunct(newinst,-- config="firmware=socfpga/dtbo/DE0_Nano_SoC_DB25.7I76_7I85S_GPIO_GPIO.dtbo num_stepgens=4 num_encoders=1 num_mencoders=4") failed: -1 - Operation not permitted Shutting down and cleaning up Machinekit... <commandline>:0: Realtime threads stopped <commandline>:0: Realtime module 'hm2_soc_ol' unloaded <commandline>:0: Realtime module 'hostmot2' unloaded <commandline>:0: Realtime module 'tp' unloaded <commandline>:0: Realtime module 'trivkins' unloaded <commandline>:0: Realtime threads stopped Cleanup done Machinekit terminated with an error.  You can find more information in the log:     /home/machinekit/linuxcnc_debug.txt and     /home/machinekit/linuxcnc_print.txt as well as in the output of the shell command 'dmesg' and in the terminal In dmesg Iget: [ 4054.891575] fpga_manager fpga0: writing socfpga/DE0_Nano_SoC_DB25.7I76_7I85S_GPIO_GPIO.rbf to Altera SOCFPGA FPGA Manager [ 4055.106816] fpga_manager fpga0: Error after writing image data to FPGA [ 4055.113936] failed to load fpga image Dne torek, 14. februar 2017 15.29.07 UTC+1 je oseba Charles Steinkuehler napisala: On 2/14/2017 8:12 AM, schoo...@btinternet.com wrote: > > I found that only an actual swap partition of at least 512MB worked reliably > using *make -j2* I usually go even farther and run: make -j1 ...unless I'm building on something with more memory.  It is also pretty easy to cross-build if you have a decent x86 machine that runs Docker, but you'd have to copy over the build directory (the kernel doesn't have dnotify enabled so won't support NFS). -- Charles Steinkuehler cha...@steinkuehler.net -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.