On 14/02/17 17:32, Klemen Zhivko wrote:
The image you are pushing - this is pre multicore image right?
If yes - why not have latest multicore with corrrect rfb-s (if they
exist) ?
No it is not, it was created today, just check the git history
Just download the image, write to SD and run it
If you start 'updating' or doing anything else before establishing it
runs, you are on your own.
Is this shomewhere available to download?
Maybe I am hitting something that ArcEyed described as:
"
Do a /sudo apt-get update/ and install any extra packages you require,
but do NOT /apt-get upgrade /if you are using this image, because
there is a later one, and upgrading will overwrite its components and
I could not get that one to work.
"
??
That is taken from and even older blog entry and relate to the problem
that was solved some time back.
Dne torek, 14. februar 2017 18.25.20 UTC+1 je oseba Schooner napisala:
I have just pushed a new image to the server.
Give me 5 minutes to move it to where it should be and I will give
you a link to download from
I suspect you are mixing old and new, it just isn't worth messing with
On 14/02/17 17:09, Klemen Živkovič wrote:
With SIM it's same:
machinekit@mksocfpga:~/git/machinekitOff/src$ DEBUG=5
machinekit@mksocfpga:~/git/machinekitOff/src$ machinekit
~/git/machinekitOff/configs/hm2-soc-stepper/5i25-socfpga.ini
MACHINEKIT - 0.1
Machine configuration directory is
'/home/machinekit/git/machinekitOff/configs/hm2-soc-stepper'
Machine configuration file is '5i25-socfpga.ini'
Starting Machinekit...
io started
<commandline>:0: Component 'iocontrol' ready
<commandline>:0: Program 'io' started
halcmd loadusr io started
hm2-soc-ol-stepper-5i25.hal:29: Realtime module 'trivkins' loaded
hm2-soc-ol-stepper-5i25.hal:33: Realtime module 'tp' loaded
hm2-soc-ol-stepper-5i25.hal:37: Realtime module 'hostmot2' loaded
hm2-soc-ol-stepper-5i25.hal:40: Realtime module 'hm2_soc_ol' loaded
hm2-soc-ol-stepper-5i25.hal:40: rc=-1:
hal_call_usrfunct(newinst,--
config="firmware=socfpga/dtbo/DE0_Nano_SoC_DB25.7I76_7I85S_GPIO_GPIO.dtbo
num_stepgens=4 num_encoders=1 num_mencoders=4") failed: -1 -
Operation not permitted
Shutting down and cleaning up Machinekit...
<commandline>:0: Realtime threads stopped
<commandline>:0: Realtime module 'hm2_soc_ol' unloaded
<commandline>:0: Realtime module 'hostmot2' unloaded
<commandline>:0: Realtime module 'tp' unloaded
<commandline>:0: Realtime module 'trivkins' unloaded
<commandline>:0: Realtime threads stopped
Cleanup done
Machinekit terminated with an error. You can find more
information in the log:
/home/machinekit/linuxcnc_debug.txt
and
/home/machinekit/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the
terminal
There are rbf files:
machinekit@mksocfpga:~/git/machinekitOff/src$ ls
/lib/firmware/socfpga -R -all
/lib/firmware/socfpga:
total 5036
drwxr-xr-x 3 root root 4096 Nov 12 16:33 .
drwxr-xr-x 17 root root 4096 Nov 12 16:31 ..
-rw-r--r-- 1 root root 1790908 Oct 28 21:21
DE0_Nano_SoC_DB25.7I76_7I76_7I76_7I76.rbf
-rw-r--r-- 1 root root 1709760 Oct 28 21:21
DE0_Nano_SoC_DB25.7I76_7I85S_GPIO_GPIO.rbf
-rw-r--r-- 1 root root 1634572 Oct 28 21:21
DE0_Nano_SoC_DB25.7I77_7I76_GPIO_GPIO.rbf
drwxr-xr-x 2 root root 4096 Nov 12 16:33 dtbo
/lib/firmware/socfpga/dtbo:
total 40
drwxr-xr-x 2 root root 4096 Nov 12 16:33 .
drwxr-xr-x 3 root root 4096 Nov 12 16:33 ..
-rw-r--r-- 1 root root 1001 Oct 28 21:21
DE0_Nano_SoC_DB25.7I76_7I76_7I76_7I76.dtbo
-rw-r--r-- 1 root root 1046 Oct 28 21:21
DE0_Nano_SoC_DB25.7I76_7I76_7I76_7I76.dts
-rw-r--r-- 1 root root 1001 Oct 28 21:21
DE0_Nano_SoC_DB25.7I76_7I85S_GPIO_GPIO.dtbo
-rw-r--r-- 1 root root 1047 Oct 28 21:21
DE0_Nano_SoC_DB25.7I76_7I85S_GPIO_GPIO.dts
-rw-r--r-- 1 root root 1001 Oct 28 21:21
DE0_Nano_SoC_DB25.7I77_7I76_GPIO_GPIO.dtbo
-rw-r--r-- 1 root root 1046 Oct 28 21:21
DE0_Nano_SoC_DB25.7I77_7I76_GPIO_GPIO.dts
-rw-r--r-- 1 root root 940 Oct 28 21:21 Makefile
-rw-r--r-- 1 root root 1007 Oct 28 21:21 template.dts
BUT these might come from ArcEye's image and not from build I
just make. I am not sure who or how this rbf files could be
(re)created...
On Tue, Feb 14, 2017 at 6:05 PM, [email protected]
<javascript:> <[email protected] <javascript:>> wrote:
On 14/02/17 16:50, Klemen Zhivko wrote:
In dmesg Iget:
[ 4054.891575] fpga_manager fpga0: writing
socfpga/DE0_Nano_SoC_DB25.7I76_7I85S_GPIO_GPIO.rbf to
Altera SOCFPGA FPGA Manager
[ 4055.106816] fpga_manager fpga0: Error after writing
image data to FPGA
[ 4055.113936] failed to load fpga image
This shows that the config string was passed OK to the
hm2_soc_ol driver, but there was a problem
either with the board or the .rbf file
I don't know how good the error reporting is with fpga
First thing to check is that the .rbf file exists and is not
corrupted
--
website: http://www.machinekit.io blog:
http://blog.machinekit.io github: https://github.com/machinekit
--- You received this message because you are subscribed to a
topic in the Google Groups "Machinekit" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/machinekit/XtlppKIxkBs/unsubscribe
<https://groups.google.com/d/topic/machinekit/XtlppKIxkBs/unsubscribe>.
To unsubscribe from this group and all its topics, send an
email to [email protected] <javascript:>.
Visit this group at
https://groups.google.com/group/machinekit
<https://groups.google.com/group/machinekit>.
For more options, visit https://groups.google.com/d/optout
<https://groups.google.com/d/optout>.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io
github: https://github.com/machinekit
---
You received this message because you are subscribed to the
Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to [email protected] <javascript:>.
Visit this group at https://groups.google.com/group/machinekit
<https://groups.google.com/group/machinekit>.
For more options, visit https://groups.google.com/d/optout
<https://groups.google.com/d/optout>.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io
github: https://github.com/machinekit
---
You received this message because you are subscribed to the Google
Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
