I just loaded the latest machinekit image from here. http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBW. 2FBBB_.28All_Revs.29_Machinekit
I get the error message" could not request pin 21 on devicepintctrl-single A little googling pops me up to https://github.com/cdsteinkuehler/beaglebone-universal-io/issues/21 It sounds like this issues was resolved a couple of years ago. Has it somehow creap back into the latest builds? I trying to get machinekit up and running as easily has possible without having to revert to command line gymnastics. (When I remove the SD card, anstrom fires up just fine) I away from home at the moment, and I don't the cables to see if this problem goes away when I run with a DVI monitor with a Hdmi to DVI convertor. Is that's what's going on?? Can this be fixed in the initial install? Tom <https://github.com/cdsteinkuehler/beaglebone-universal-io/issues/21> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
