The strange thing is that anstrom seems to have the same boot error but it seems to be able to handle it (more or less)
On Sun, Feb 19, 2017 at 6:46 PM, Tom M <[email protected]> wrote: > > I just loaded the latest machinekit image from here. > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBW.2FB > BB_.28All_Revs.29_Machinekit > > I get the error message" could not request pin 21 on devicepintctrl-single > > A little googling pops me up to https://github.com/ > cdsteinkuehler/beaglebone-universal-io/issues/21 > > It sounds like this issues was resolved a couple of years ago. Has it > somehow creap back into the latest builds? > > I trying to get machinekit up and running as easily has possible without > having to revert to command line gymnastics. > > (When I remove the SD card, anstrom fires up just fine) I away from home > at the moment, and I don't the cables to see if this problem goes away when > I run with a DVI monitor with a Hdmi to DVI convertor. > Is that's what's going on?? Can this be fixed in the initial install? > > Tom > > > <https://github.com/cdsteinkuehler/beaglebone-universal-io/issues/21> > > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
