Ohh and I failed to mention that I am werking on a beaglebone green with the only method of login is through SSH,
X-serving machinekit is not fun :( gunna look into setting up that remote viewer eventually. On Wednesday, June 14, 2017 at 11:59:18 AM UTC-4, Konsgn wrote: > > the linked working image is not the default password, so after shrinking > it to 4gb size as followed by here: > http://www.aoakley.com/articles/2015-10-09-resizing-sd-images.php > (you ignore the instructions relating to a first partition, theres only > one in a beaglebone, but start sector is still relevant instructions) > > I got it working with an unknown password, Then by following the > following, I got it to work eventually > > https://unix.stackexchange.com/questions/81240/manually-generate-password-for-etc-shadow > > Now to configure it all. > > Good luck all. > > On Wednesday, June 14, 2017 at 12:43:27 AM UTC-4, Bas de Bruijn wrote: >> >> >> >> > On 14 Jun 2017, at 00:57, Konsgn <[email protected]> wrote: >> > >> > what is the password >> >> If you are working from an image the standard password is: machinekit >> > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
