Well the ethernet over usb isn't coming up like it should, I can't seem to get wireless configured via connmanctl via scripts, and my serial->usb thingy has gone missing. So I've been going back and forth editing the ssd config files booting, shutting down, then reading the logs... this is getting old.
The ethernet over usb appears to configure itself in the logs on the BBGW, and on the PC side they get created as eth6 and eth7, but they don't get an IP assigned. Assigning one manually doesn't work. On Wednesday, July 26, 2017 at 11:15:21 PM UTC-4, Daren Schwenke wrote: > > I did (cross compiling), but honesty I can't remember what i had setup. > I'll add swap. > > On Jul 26, 2017 21:27, "Charles Steinkuehler" <[email protected]> > wrote: > > On 7/26/2017 8:15 PM, Daren Schwenke wrote: > > Thank you all... > > You are doing *me* a favor, not the other way around. > > > > I'll have a BBGW and BBG loaded up and ssh-able for you gents as soon as > I can > > open the ports on my "idiot proof" router. > > Likely it will be 2am or tomorrow at this point though, but still.. > Faster. > > > > Plan is follow Robert's instructions, expand / to fill two 16gb SD > cards, assign > > static IP's, and put them on the network. > > Given the intent is to make an image, I should probably ask... Should I > even > > expand to fill 16gb? > > Partition size (beyond 4G) is not really significant. The image needs > to be created from original sources, so the important part is to get > things working, then we can figure out how to merge any required > changes into the image build scripts (and the ~4GB images they use > when building from scratch). > > > Anything else specific you need to this goal, speak now. (like swap, or > a local > > i7 cross compiling linux host) > > I always add 1-2 GB of swap (depending on the uSD size), but it's > probably not a huge issue in your case. Cross compiling is nice, but > likely more trouble than it's worth unless you already have something > setup. > > -- > Charles Steinkuehler > [email protected] > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to a topic in the > Google Groups "Machinekit" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/machinekit/RrNLUo4ASP4/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
