It probably does. It's just hard to configure headless, without a connection, using connman (which I've never done). We can come back to that. It seems to recognize the wilink device fine, so the rest is just mechanics.
In the mean time I've brought up the BBG instead and opened ssh to it. I'll send the address privately. On Thursday, July 27, 2017 at 5:24:45 PM UTC-4, Charles Steinkuehler wrote: > > Are you using the image Robert created? > > > https://rcn-ee.net/rootfs/bb.org/testing/2017-07-26/machinekit/bone-debian-8.9-machinekit-armhf-2017-07-26-4gb.img.xz > > > ...I'd hope that has the proper setup logic to handle the BBG/BBGW. > > On 7/27/2017 3:28 PM, Daren Schwenke wrote: > > Well the ethernet over usb isn't coming up like it should, I can't seem > to get > > wireless configured via connmanctl via scripts, and my serial->usb > thingy has > > gone missing. > > So I've been going back and forth editing the ssd config files booting, > shutting > > down, then reading the logs... this is getting old. > > > > The ethernet over usb appears to configure itself in the logs on the > BBGW, and > > on the PC side they get created as eth6 and eth7, but they don't get an > IP assigned. > > Assigning one manually doesn't work. > > > > On Wednesday, July 26, 2017 at 11:15:21 PM UTC-4, Daren Schwenke wrote: > > > > I did (cross compiling), but honesty I can't remember what i had > setup. I'll > > add swap. > > > > On Jul 26, 2017 21:27, "Charles Steinkuehler" < > [email protected] <javascript:> > > <mailto:[email protected] <javascript:>>> wrote: > > > > On 7/26/2017 8:15 PM, Daren Schwenke wrote: > > > Thank you all... > > > You are doing *me* a favor, not the other way around. > > > > > > I'll have a BBGW and BBG loaded up and ssh-able for you gents > as soon > > as I can > > > open the ports on my "idiot proof" router. > > > Likely it will be 2am or tomorrow at this point though, but > still.. > > Faster. > > > > > > Plan is follow Robert's instructions, expand / to fill two > 16gb SD > > cards, assign > > > static IP's, and put them on the network. > > > Given the intent is to make an image, I should probably > ask... > > Should I even > > > expand to fill 16gb? > > > > Partition size (beyond 4G) is not really significant. The image > needs > > to be created from original sources, so the important part is to > get > > things working, then we can figure out how to merge any required > > changes into the image build scripts (and the ~4GB images they > use > > when building from scratch). > > > > > Anything else specific you need to this goal, speak now. > (like swap, > > or a local > > > i7 cross compiling linux host) > > > > I always add 1-2 GB of swap (depending on the uSD size), but > it's > > probably not a huge issue in your case. Cross compiling is > nice, but > > likely more trouble than it's worth unless you already have > something > > setup. > > > > -- > > Charles Steinkuehler > > [email protected] <javascript:> <mailto: > [email protected] <javascript:>> > > > > -- > > website: http://www.machinekit.io blog: > http://blog.machinekit.io > > github: https://github.com/machinekit > > --- > > You received this message because you are subscribed to a topic > in the > > Google Groups "Machinekit" group. > > To unsubscribe from this topic, visit > > > https://groups.google.com/d/topic/machinekit/RrNLUo4ASP4/unsubscribe > > < > https://groups.google.com/d/topic/machinekit/RrNLUo4ASP4/unsubscribe>. > > To unsubscribe from this group and all its topics, send an email > to > > [email protected] <javascript:> > > <mailto:machinekit%[email protected] <javascript:>>. > > > Visit this group at https://groups.google.com/group/machinekit > > <https://groups.google.com/group/machinekit>. > > For more options, visit https://groups.google.com/d/optout > > <https://groups.google.com/d/optout>. > > > > > > -- > > website: http://www.machinekit.io blog: http://blog.machinekit.io > github: > > https://github.com/machinekit > > --- > > You received this message because you are subscribed to the Google > Groups > > "Machinekit" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email > > to [email protected] <javascript:> > > <mailto:[email protected] <javascript:>>. > > Visit this group at https://groups.google.com/group/machinekit. > > For more options, visit https://groups.google.com/d/optout. > > > > > -- > Charles Steinkuehler > [email protected] <javascript:> > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
