Thank you all... You are doing *me* a favor, not the other way around. I'll have a BBGW and BBG loaded up and ssh-able for you gents as soon as I can open the ports on my "idiot proof" router. Likely it will be 2am or tomorrow at this point though, but still.. Faster.
Plan is follow Robert's instructions, expand / to fill two 16gb SD cards, assign static IP's, and put them on the network. Given the intent is to make an image, I should probably ask... Should I even expand to fill 16gb? Anything else specific you need to this goal, speak now. (like swap, or a local i7 cross compiling linux host) -Daren On Wed, Jul 26, 2017 at 6:29 PM, Robert Nelson <[email protected]> wrote: > Here you go, fresh build with v4.4.x-ti-rt > > https://rcn-ee.net/rootfs/bb.org/testing/2017-07-26/ > machinekit/bone-debian-8.9-machinekit-armhf-2017-07-26-4gb.img.xz > > on first bootup, make sure u-boot overlays is active: > > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays > > (it should be, but if your eMMC u-boot is too old it won't be) > > To disable hdmi/emmc/etc: > > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_ > Disable_on-board_devices > > cape universal is setup to load automaticlly too. (config-pin doesn't > require root ;) ) > > This image also defaults to uio mode for the pru, so you won't have to > change, as it's setup correctly > > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_PRU_Options > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
