I have run this in the past with no issues. My current testing machine is targeting the BBGW though, so it's using rt-preempt (so wireless works) and the BeBoPr config instead (as CRAMPS shares pins with the wifi/bluetooth module) So I can't directly assist you atm.
On Sunday, September 3, 2017 at 1:35:21 PM UTC-4, machinen wrote: > > Hi, > I am in somewhat similar situation to yours and I have few questions for > you: > > Were you able to upgrade your installation? Because the ready-made image > for BBB is quite old and when doing update/upgrade, the Machinekit > package(s) is(are) being kept back and it is because dependency error. The > same is when installing on new clean system flash (which are newer) by the > how to in Machinekit docs. > > Are you able to shutdown/poweroff/reboot your BBB with CRAMPS? I have the > Element14 BBB rev. C with CRAMPS 2.2 and I cannot shut it down completely. > The power on LED is still on and there are two LEDs on on CRAMPS and on the > right side of RIJ45 connector (bank of four LEDs) there is one LED faintly > blinking. Otherwise the BBB is turned off (I cannot SSH to it). I have to > manually shut the power down. Are you experiencing the same? > > And given the above, hoare you able to run the fabrikator Mini CRAMPS > configuration out of the box? My system is screaming at me about missing > fdm.config. Maybe it is because old machinekit (but as I said, currently > the dependency is broken), the actual error is: > halcmd loadusr io started > Traceback (most recent call last): > File "fabrikator_mini.py", line 8, in <module> > from fdm.config import velocity_extrusion as ve > ImportError: No module named config > Shutting down and cleaning up Machinekit... > > Thanks. > > On Tuesday, August 29, 2017 at 8:08:30 AM UTC+2, Pranav Pandey wrote: >> >> Hi Folks, >> >> This is my first post on this group. I am working on integrating 3d >> printing and CNC Milling in a single machine. I have worked with Arduino >> Mega before and have run the machine on the Marlin firmware. >> >> However I am interested in using the Machine kit platform to run my 3d >> printer. My background is Electrical and hence have only basic knowledge >> about coding. I would like to know if someone has successfully 3D Printed >> using the above setup. If yes, Can you please share some links or procedure >> for the same? >> >> Thanks >> Pranav >> > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
