> > I'll answer my own question. I was searching through the HAL docs rather > than the ini docs. > http://www.machinekit.io/docs/config/ini_config/#sub:AXIS-section In that document I found ANGULAR_UNITS = degrees and has nothing to do with NC code. *"'ANGULAR_UNITS = <units>' - Specifies the 'machine units' for rotational axes. Possible choices are 'deg', 'degree' (360 per circle), 'rad', 'radian' (2pi per circle), 'grad', or 'gon' (400 per circle). This does not affect the angular units of NC code. In RS274NGC, A-, B- and C- words are always expressed in degrees."* It doesn't state if the SCALE is a floating point number like 75,000 pulses per 360 degrees = 208.33333 per 1 degree or if it has to be 208.
-- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
