Hi. I'm new to machinekit and try to set up machinekit on a beagleboard x15.
The way pins are designated on the BBB is: 0811 = GPIO on P8, pin 11 811 = GPIO on P8, pin 11 (identical to above) 1811 = PRU direct output on P8, pin 11 2927 = PRU direct input on P9, pin 27 The problem is that on the x15 I want GPIO on P16, which is not covered here. Does anyone have any suggestions of where I should start? Or does anyone have a machinekit setup on a x15 and would like to share their configuration? I would be interested in doing a summery of how to setup of machinekit on a BeagleBoard x15, when successful. Best regards, Magnus -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
