Bas, I used that image because it was linked to in this guide that I was following:
https://www.rs-online.com/designspark/upgrading-a-cnc-milling-machine-part-2 This is the one that has been giving me errors. Alternatively, I found this other guide, and seemed to successfully configure another Beaglebone with it: https://machinekoder.com/machinekit-debian-stretch-beaglebone-black/ Downside to this one is that I wasn't able to get a monitor working while connected to the Beaglebone's HDMI port, and the build seemed to just be an empty shell when I connected to it via machinekit-client. There weren't any premade configurations like the COMET configuration I was working with on the other. I'm not committed to any particular image. I need to get a Beaglebone working with the Probotix cape to control a 3-axis CNC and have a GUI interface via Machinekit. Those are my parameters. Can you point me in the right direction to achieve my goals? Thank you, Peter On Sunday, November 11, 2018 at 11:35:03 PM UTC-6, Bas de Bruijn wrote: > > Hi Peter, > > On 12 Nov 2018, at 02:57, [email protected] <javascript:> wrote: > > > I'm having trouble getting my copy of Machinekit configured on the > Beaglebone Black. I am currently getting the below error: > > <Machinekit_error_0.JPG> > > > Any suggestions would be greatly appreciated. I installed the below build: > > <Machinekit_error_1.jpg> > > Which was sourced from here: > > > https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBW.2FBBB_.28All_Revs.29_Machinekit > > Is there a reason you’ve taken the (very old) Jessie image? Why not the > stretch image? > > Bas > > If anyone can help me with this I would be eternally thankful. > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <javascript:>. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > > <Machinekit_error_0.JPG> > > <Machinekit_error_1.jpg> > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
