Dear Machinekit-Developers & users, we are in the process of implementing a Machinekit instance to control a self constructed 3d-fdm-printer. As written above, we installed Machinekit on Debian Stretch following the manual on machinekit's homepage. A Mesa 6i25+7i76 combo is to be used for hardware stepgen.
We have generated a simple HAL and INI-file (for XYZA), that works with axis GUI. However, we are unable to move the four axes with the Machineface-GUI. Everything is set up step by step following this manual (https://github.com/machinekoder/QtQuickVcp). When we click on a Jog-Button, nothing happens. MachinekitClient is launched on the same computer as machinekit installation. Can you give me a hint, why Machineface won't work? If you need further information, I'm glad to provide it. Another question: Where in the source-files of machinekit is the calculation for velocity extrusion? We managed to setup Cura+NGCWriter, but we would like to understand, what Machinekit does in the background. Thank you very much! Best regards Dennis -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
