Hi there i was having few issues when was going from local Axis to Remote mode (Machineface GUI) but at end resolved them all.
but to help you somehow i need more info - upload your HAL and INI file, also i found that if you used Thermal runaway protection in HAL - and something is wrong with temp - it will immediately put it in E-STOP error mode without any warnings or explanation (only "n/a" on temperature is shown) пятница, 23 ноября 2018 г., 19:10:05 UTC+2 пользователь [email protected] написал: > > Dear Machinekit-Developers & users, > we are in the process of implementing a Machinekit instance to control a > self constructed 3d-fdm-printer. As written above, we installed Machinekit > on Debian Stretch following the manual on machinekit's homepage. A Mesa > 6i25+7i76 combo is to be used for hardware stepgen. > > We have generated a simple HAL and INI-file (for XYZA), that works with > axis GUI. However, we are unable to move the four axes with the > Machineface-GUI. Everything is set up step by step following this manual ( > https://github.com/machinekoder/QtQuickVcp). When we click on a > Jog-Button, nothing happens. MachinekitClient is launched on the same > computer as machinekit installation. > > Can you give me a hint, why Machineface won't work? If you need further > information, I'm glad to provide it. > > Another question: > Where in the source-files of machinekit is the calculation for velocity > extrusion? We managed to setup Cura+NGCWriter, but we would like to > understand, what Machinekit does in the background. > > Thank you very much! > Best regards > Dennis > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
