On 2/10/2019 3:17 PM, Charles Steinkuehler wrote: > Both the BeagleBone and the RPi max out a a few hundred > KBit/s over Ethernet
Sorry about that, I've been playing with my SoC+FPGA boards too much (they actually have GigE). The BBB and RPi are limited to 100 MBit/s (max) and _still_ often can't run at wire speed. The bandwidth limit isn't really a big problem, but you really want your machine control interface on a dedicated low-latency network link, which means two Ethernet ports minimum (one for machine control to the 7i92 and one for general purpose networking). https://www.element14.com/community/message/90037/l/sbc-network-throughput#90037 -- Charles Steinkuehler [email protected] -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
