Re: [Machinekit] Startup error messages in Axis

[schoone...@gmail.com]

They are not errors or warnings, they are telling you what is happening with the pru. Make sure your DEBUG= setting in your ini file is 0 The lines are coming from hal_pru_generic.c using rtapi_print() and would not normally show up without debugging set to something Either way, if they were errors, they would start 'ERROR:' On 21/02/19 01:00, mugginsac wrote: I am running Stretch 9.8 (testing) on a BBB with Xylotex DB25 cape. I am getting the following errors or warnings when Axis starts up: prussdrv_init prussdrv_open prussdrv_pruintc_init prussdrv_map_prumem PRU data ram mapped num_pwmgens : 1 num_stepgens: 4 num_encoders: 0 Init pwm hpg_pwm_init Init stepgen hpg_stepgen_init Init encoder If I clear them then everything seems to run fine. So the question is what do they mean and why am I getting them? Is there anyway to not get them? -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.