Re: [Machinekit] Mesa 6i25 & 7i76 - Operation not permitted with new Machinekit Version

[schoone...@gmail.com]

Please read http://www.machinekit.io/docs/getting-help/ No-one can help you with this amount of information. On 05/03/19 07:16, destra...@gmail.com wrote: Hello dear Machinekit community, we've successfully implemented a self built 3d printer with Machinekit. For stepper signal generation, we use the above mentioned cards. Up until yesterday, our config was working with the string rt.loadrt('hm2_pci', config='num_encoders=1 num_stepgens=4 sserial_port_0="00xxxx"') Yesterday I updated via apt-get upgrade to Machinekit version 0.1.1551530147.git6a143ec-1~stretch and now we get the following error on launch: RuntimeError: rtapi_loadrt '('hm2_pci', 'config=num_encoders=1 num_stepgens=4 sserial_port_0="00xxxx"')' failed: Operation not permitted Have you seen this error before? Best regards Dennis -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.