Re: [Machinekit] Mesa 6i25 & 7i76 - Operation not permitted with new Machinekit Version

[schoone...@gmail.com]

On 05/03/19 11:32, Bas de Bruijn wrote: Not sure how much i can help here. Further on there’s this section: 8888:rt halg_xinitfv:90 HAL: initializing component 'hm2_pci' type=1 arg1=0 arg2=0/0x0 Mar  5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt PCI_ID: 2718:5125 2718:5125 Mar  5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt RTAPI_PCI: DeviceID: 2718 5125 2718 5125 Mar  5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt RTAPI_PCI: Calling driver probe function Mar  5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt RTAPI_PCI: Enabling Device 0000:03:00.0 Mar  5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt Resource 0: 0xf7e00000 0xf7e0ffff 00000000 Mar  5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt Failed to parse "/sys/devices/pci0000:00/0000:00:1c.2/0000:02:00.0/0000:03:00.0/resource" Mar  5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt hm2_pci: skipping AnyIO board at 0000:03:00.0, failed to enable PCI device Mar  5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt Driver probe function failed! Mar  5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt hm2_pci: error registering PCI driver Mar  5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib: Did other things get updates too perhaps? hm2_pci has not changed for 3 years and I cannot immediately see any other changes that might affect First step is to reverse the process apt remove machinekit* Then download http://deb.machinekit.io/debian/pool/main/m/machinekit/machinekit_0.1.1543327459.gite758f69-1~stretch_amd64.deb http://deb.machinekit.io/debian/pool/main/m/machinekit/machinekit-rt-preempt-dbgsym_0.1.1543327459.gite758f69-1~stretch_amd64.deb and install with dpkg -i machinekit_0.1.1543327459.gite758f69-1~stretch_amd64.deb machinekit-rt-preempt-dbgsym_0.1.1543327459.gite758f69-1~stretch_amd64.deb from wherever you downloaded them to Then try again with DEBUG=5 set and attach the linuxcnc.log whatever the result. (blank linuxcnc.log first) On the face of it the error is failing to contact the board, not failing to load the driver and the error from the driver is resultant from that. If you did not have this working immediately before ( the same day) you updated machinekit, I would check all cabling and possibly remove the 6i25, clean the slot and board contacts with methylated spirits or similar, re-seat and try again. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.