On 3/6/2019 5:56 AM, Damien.D wrote: > On Tue, Feb 26, 2019 at 5:15 PM Charles Steinkuehler < > [email protected]> wrote: > > @Charles Steinkuehler <[email protected]> If you are allow to talk > about it, is the pinout similar as the BBB for UART, SPI, eQEP pins, ...?
There are a lot more features available on the AI. You do not loose pins on P8/P9 for HDMI, and many of the expansion pins are tied to more than one ball on the CPU to allow for lots of different choices regarding I/O, with a focus on making more of the encoder and PRU pins available for use. There's no handy I/O spreadsheet available yet (and I don't have time to make one), but it shouldn't be too hard to migrate capes. In general, the primary pin functions (eg: I2C, SPI, timer) match up, it's the secondary uses (like encoder & PRU I/O) that might change. -- Charles Steinkuehler [email protected] -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
