> On 7 Apr 2019, at 11:55, gang han <[email protected]> wrote: > > I changed Nothing. I just check error message in linuxcnc.log. > I thought the error in the log file cause the problem, I did not test pins > signal.
I don’t understand what you did or did not do at all. An entry in a log file is the result of an error, not a cause. Glad you got it working. > > 1845 is correct. > > Bas de Bruijn <[email protected]> 于2019年4月7日周日 下午5:39写道： >> >> >> > On 7 Apr 2019, at 11:29, gang han <[email protected]> wrote: >> > >> > Hi >> > thanks. >> > i solved the problem by using like 1845 with the error "user hpg: Unknown >> > pin: 228" >> > 😁pin2_28 is the pin of old version beaglebone, maybe there is some wrong >> > inside hal_pru_generic. >> >> I don’t think there’s anything wrong with hal_pru_generic >> >> What did you do differently than your previous attempt at using the pin like >> 1845? Then it did not work and now it does. What did you change? >> >> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
