Helllo... We tried a LOT. But it doesnt seem to work. Does anybdy uses these external USB modems in LINUX? I do hope linux supports them.
The MODEM DRIVER : slmodem-2.9.10.tar.gz (supports USB56) from: http://www.smlink.com/main/item.php?ln=en&item_id=84&main_id=32 I am also attaching these files: /proc/bus/usb/devices /proc/bus/usb/drivers /var/log/dmesg mayb it'll help you find out ,wot went wrng. I mentioned tht the modem details were displayed on queryin the modem. But it doesnt seem to b displayed anymore. The querying goes on fine..but no details are displayd. >what probably is happening is the generic initialisation string given to >the modem by kppp is confusing the modem. >all modems load a default profile when they are switched on and >you dont need an additional string under normal circumstances how can v know d defaultd loaded profile of a modem..? anyway 'll go thru kppp help.. 2 c if thr is any option 2 disable its initlsn strin Minicom was tried to. But with no succcess. THnkx a LOT Tke Cre hashir -------------- next part -------------- usbdevfs hub 96-111: hiddev hid acm ST7554 USB Modem -------------- next part -------------- T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=ef80 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=8086 ProdID=1120 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 13/900 us ( 1%), #Int= 1, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=ef40 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0483 ProdID=7554 Rev= 2.00 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=80 Prot=ff Driver=ST7554 USB Modem E: Ad=81(I) Atr=13(Int.) MxPS= 4 Ivl=1ms I: If#= 0 Alt= 1 #EPs= 3 Cls=02(comm.) Sub=80 Prot=ff Driver=ST7554 USB Modem E: Ad=81(I) Atr=13(Int.) MxPS= 4 Ivl=1ms E: Ad=02(O) Atr=05(Isoc) MxPS= 128 Ivl=1ms E: Ad=83(I) Atr=05(Isoc) MxPS= 128 Ivl=1ms I: If#= 0 Alt= 2 #EPs= 3 Cls=02(comm.) Sub=80 Prot=ff Driver=ST7554 USB Modem E: Ad=81(I) Atr=13(Int.) MxPS= 4 Ivl=1ms E: Ad=04(O) Atr=05(Isoc) MxPS= 128 Ivl=1ms E: Ad=85(I) Atr=05(Isoc) MxPS= 128 Ivl=1ms I: If#= 0 Alt= 3 #EPs= 5 Cls=02(comm.) Sub=80 Prot=ff Driver=ST7554 USB Modem E: Ad=81(I) Atr=13(Int.) MxPS= 4 Ivl=1ms E: Ad=02(O) Atr=05(Isoc) MxPS= 128 Ivl=1ms E: Ad=83(I) Atr=05(Isoc) MxPS= 128 Ivl=1ms E: Ad=04(O) Atr=05(Isoc) MxPS= 128 Ivl=1ms E: Ad=85(I) Atr=05(Isoc) MxPS= 128 Ivl=1ms -------------- next part -------------- Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007fc0000 (usable) BIOS-e820: 0000000007fc0000 - 0000000007ff8000 (ACPI data) BIOS-e820: 0000000007ff8000 - 0000000008000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 127MB LOWMEM available. On node 0 totalpages: 32704 zone(0): 4096 pages. zone(1): 28608 pages. zone(2): 0 pages. Kernel command line: ro root=LABEL=/ Initializing CPU#0 Detected 1594.864 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3185.04 BogoMIPS Memory: 124504k/130816k available (1347k kernel code, 4904k reserved, 999k data, 132k init, 0k highmem) Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. Starting kswapd VFS: Disk quotas vdquot_6.5.1 pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 00:1f.1 ICH2: chipset revision 5 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: SAMSUNG SV4002H, ATA DISK drive blk: queue c03c9f40, I/O limit 4095Mb (mask 0xffffffff) hdc: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 78242976 sectors (40060 MB) w/1945KiB Cache, CHS=4870/255/63, UDMA(100) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 146k freed VFS: Mounted root (ext2 filesystem). Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 132k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 17:59:01 Mar 13 2003 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:1f.2 PCI: Setting latency timer of device 00:1f.2 to 64 usb-uhci.c: USB UHCI at I/O 0xef40, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 10 for device 00:1f.4 PCI: Setting latency timer of device 00:1f.4 to 64 usb-uhci.c: USB UHCI at I/O 0xef80, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]> hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice hub.c: new USB device 00:1f.2-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x483/0x7554) is not claimed by any active driver. EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,10), internal journal Adding Swap: 273064k swap-space (priority -1) hub.c: new USB device 00:1f.4-2, assigned address 2 hub.c: USB hub found hub.c: 4 ports detected ST7554 USB Modem. usb.c: registered new driver ST7554 USB Modem <6>slusb: slusb0 is found. usb.c: registered new driver acm acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal EXT3-fs: mounted filesystem with ordered data mode.
