How about ACTIVE-ACTIVE sharing the same installation via an NFS mount (or possibly shared storage in a cluster)?
D. > There are several ways to set this up. Here are two examples > that I've done: > > - Front end the servers with an LVS cluster and run the servers > in your DMZ. The LVS cluster acts as a firewall and connects a > user to an active internal server (one of many in its list) based > on either an ip address or a port. If one of the internal > servers stops responding then the LVS cluster will only direct > new requests to the servers that are still responding. > > - Run redundant external servers. One server is the primary and > runs all the requests. This server is maxed out with all the > hardware needed to handle peak loads and growth for a few years. > The other server is the secondary and is setup to handle the > current normal load. You run a heartbeat program on the servers > and write a script to bring up the secondary when the heartbeat > is lost from the Primary. In this case the Secondary runs > multiple IP Addresses - running it's own set, plus it takes over > the Primaries IP Addresses on failure of the heartbeat. > You can write your own heartbeat program which is as simple as a > ping, or you can use one of the stock Linux services that > automatically does this sort of thing for you (sorry, I can't > remember the name of any at this time, but Google is your friend > - a good starting point is the LVS project). > > On Tue, 2002-11-19 at 18:56, David Richards wrote: > > > I have a domain with 2 master mx servers and I want to run > > > mailman on > both so if 1 is down, the mailing lists still > work. > > I have not setup > mailman yet, but have subscribed to > quite a > > few lists using it. > > > > > Does anyone have a similar setup? > > > > > > Most folks do this via NFS. They setup a primary mailserver > then > > a secondary that only kicks in if the heartbeat of the > primary is > > interrupted. The Mailman setup is stored in a home > directory that > > is mounted via NFS to both servers. > > > > > > Are there any guides on setting up mailman in this fashion?? > We are > looking at doing the same here for greater availability. > > > > Is it possible to set up so that both mailman installations can > run at the > same time?? Active-Active?? Otherwise, what is the > best way to do the > 'heart beat'? > > > > Dave. > > > > Dave Richards > > Project Manager (Messaging) > > Information Technology Services > > Queensland University of Technology > > > > ------------------------------------------------------ > > Mailman-Users mailing list > > [EMAIL PROTECTED] > > http://mail.python.org/mailman/listinfo/mailman-users > > Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py > > Searchable Archives: > http://www.mail-archive.com/mailman-users@python.org/ > > > This message was sent to: [EMAIL PROTECTED] > > Unsubscribe or change your options at > > > http:[EMAIL PROTECTED] > > Dave Richards Project Manager (Messaging) Information Technology Services Queensland University of Technology ------------------------------------------------------ Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ This message was sent to: archive@jab.org Unsubscribe or change your options at http://mail.python.org/mailman/options/mailman-users/archive%40jab.org