Hello, Seth and List,

I'm not sure I do not understand when you refer to the "function menu on your 
keyboard." I didn't know there is a menu associated with a keyboard. Do  you 
mean the computer keyboard rather than the synth keyboard?

Perhaps there's a "funcity" menu in QWS which I have not noticed.

I have not ever used the plus and minus keys to navigate menus, so again, I 
need some clarification.

In any case, I do thank you for writing me.

Joe Giovanelli

----- Original Message -----
From: SethJ <[email protected]>
To: "QWS list" <[email protected]>
Date: Wednesday, May 6, 2015 23:22
Subject: RE: QWS List a few questions please

>
>
> Does your midisport have only two sets of midi in and out ports, or 4?  If
> it's only two, then there is a possible explanation.  On the track diolog,
> you are only seeing your midi in ports, and that's normal.  If you have 4
> sets of both in and out, then some of the ports might be disabled.
> As for local, for some reason with Casio and cheaper Yamaha keyboards,
> trying to turn it off through the midi menu in QWS doesn't work.  You'll
> have to do it using the function menu on your keyboard.  I can relate, since
> I also own a Casio product.  If your keyboard doesn't have large print, you
> may have to arrow through the menu to find it while pressing your plus and
> minus buttons in order to see what each option does until you get to the
> local setting.  
> Hope this works for you!!!
> Seth.
> 
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On Behalf Of Joe
> Giovanelli
> Sent: Wednesday, May 06, 2015 6:04 PM
> To: QWS list
> Subject: Re: QWS List a few questions please
> 
>  Hello, Juan,
> 
> Thanks to you I found the "preferred port" options under Options. It worked.
> 
> There's something unusual about the ports menu. I see about 6 possible
> ports, some input and some output. When I go to the "preferred ports"
> option, I only see two or three ports. I don't know what to make of that. As
> said, it's a MIDISPORT, so perhaps all this will make sense to some of you.
> 
> Again I thank you for your aid.
> 
> Joe Giovanelli
> 
> I understand that I should be able to create a track using control-ins. No
> track is created. I find, however, that if I go to the Tracks menu I can
> create a new track by pressing I. Why can't I get the control-ins to work?
> 
> I cannot turn off "local." I go to the MIDI menu and press L but nothing
> happens.
> 
> I made a track and selected an instrument other than Piano, the default on
> my PX-350. Even though I couldn't tur Local off, I made a test recording and
> it played properly. I heard just the instrumented I selected for the track.
> 
> 
> 
> ----- Original Message -----
> From: Juan Bello <[email protected]>
> To: "QWS list" <[email protected]>
> Date: Tuesday, May 5, 2015 19:34
> Subject: Re: QWS List a few questions please
> 
> >
> >
> > hi, under the qws options  there is a prefferred midi port selection 
> > list. Make sure the keyboard is connected before selecting the port 
> > and also before starting qws. You can also always go to the options 
> > menz and under ports check and uncheck the ports qws should use.
> > 
> > 2015-05-05 18:04 GMT-05:00, Joe Giovanelli <[email protected]>:
> > > Hello, Everybody,
> > >
> > > For many reasons I have not done any MIDI sequencing for more than 
> > > ten years. I've forgotten many thing, but I tried reading the QWS 
> > > instructions before writing you.
> > >
> > > Just in case it helps, I'm using a MIDISPORT and a Casio PX-350. The 
> > > computer runs Windows 7.
> > >
> > > 1. I set the desired port from the menu, but when I load a sequence, 
> > > all tracks use the Microsoft GS Wave Table. I had to go to each 
> > > tracks and assign the proper ports. I guess it comes down to how to 
> > > make those ports as the defaults for any sequence I load?
> > >
> > > I suppose I could ask other questions but this is my main difficulty 
> > > as I begin MIDI work.
> > >
> > > I thank you for any ideas here.
> > >
> > > Joe Giovanelli
> > > To unsubscribe or change list options, see 
> > > http://lists.andrelouis.com
> > >
> > > for archived list posts, see 
> > > http://www.mail-archive.com/[email protected]
> > >
> > 
> > 
> > 
> > Juan Pablo Bello
> > Cel. 313-879-2884
> > To unsubscribe or change list options, see http://lists.andrelouis.com
> > 
> > for archived list posts, see 
> > http://www.mail-archive.com/[email protected]
> To unsubscribe or change list options, see http://lists.andrelouis.com
> 
> for archived list posts, see http://www.mail-archive.com/[email protected]
> 
> To unsubscribe or change list options, see http://lists.andrelouis.com
> 
> for archived list posts, see http://www.mail-archive.com/[email protected]
To unsubscribe or change list options, see http://lists.andrelouis.com

for archived list posts, see http://www.mail-archive.com/[email protected]

Reply via email to