Hi, Andre, I must be a poor student. I tried "applications-enter." That did not create a track.
I'm using System Access so don't think I have a pass-through problem here. As I get older, I'm learning more and more ways to make mistakes. I hope I can make QWS work. Thank you for writing. Joe Giovanelli ----- Original Message ----- From: André_Baldo <[email protected]> To: "QWS list" <[email protected]> Date: Wednesday, May 6, 2015 22:57 Subject: Re: QWS List a few questions please > > > About control+insert, well, I think I can help. Insert is a command > key for Jaws and NVDA! You can use insert+3 for pass key through on > Jaws or insert+f2 to do it on NVDA. But a quick way is, in the empty > track list, press applications and enter! > > HTH! > André! > > 2015-05-06 22:03 GMT-03:00, Joe Giovanelli <[email protected]>: > > Hello, Juan, > > > > Thanks to you I found the "preferred port" options under Options. It > > worked. > > > > There's something unusual about the ports menu. I see about 6 possible > > ports, some input and some output. When I go to the "preferred ports" > > option, I only see two or three ports. I don't know what to make of that. As > > said, it's a MIDISPORT, so perhaps all this will make sense to some of you. > > > > Again I thank you for your aid. > > > > Joe Giovanelli > > > > I understand that I should be able to create a track using control-ins. No > > track is created. I find, however, that if I go to the Tracks menu I can > > create a new track by pressing I. Why can't I get the control-ins to work? > > > > I cannot turn off "local." I go to the MIDI menu and press L but nothing > > happens. > > > > I made a track and selected an instrument other than Piano, the default on > > my PX-350. Even though I couldn't tur Local off, I made a test recording and > > it played properly. I heard just the instrumented I selected for the track. > > > > > > > > ----- Original Message ----- > > From: Juan Bello <[email protected]> > > To: "QWS list" <[email protected]> > > Date: Tuesday, May 5, 2015 19:34 > > Subject: Re: QWS List a few questions please > > > >> > >> > >> hi, under the qws options there is a prefferred midi port selection > >> list. Make sure the keyboard is connected before selecting the port > >> and also before starting qws. You can also always go to the options > >> menú and under ports check and uncheck the ports qws should use. > >> > >> 2015-05-05 18:04 GMT-05:00, Joe Giovanelli <[email protected]>: > >> > Hello, Everybody, > >> > > >> > For many reasons I have not done any MIDI sequencing for more than ten > >> > years. I've forgotten many thing, but I tried reading the QWS > >> > instructions > >> > before writing you. > >> > > >> > Just in case it helps, I'm using a MIDISPORT and a Casio PX-350. The > >> > computer runs Windows 7. > >> > > >> > 1. I set the desired port from the menu, but when I load a sequence, > >> > all > >> > tracks use the Microsoft GS Wave Table. I had to go to each tracks and > >> > assign the proper ports. I guess it comes down to how to make those > >> > ports as > >> > the defaults for any sequence I load? > >> > > >> > I suppose I could ask other questions but this is my main difficulty as > >> > I > >> > begin MIDI work. > >> > > >> > I thank you for any ideas here. > >> > > >> > Joe Giovanelli > >> > To unsubscribe or change list options, see http://lists.andrelouis.com > >> > > >> > for archived list posts, see > >> > http://www.mail-archive.com/[email protected] > >> > > >> > >> > >> > >> Juan Pablo Bello > >> Cel. 313-879-2884 > >> To unsubscribe or change list options, see http://lists.andrelouis.com > >> > >> for archived list posts, see > >> http://www.mail-archive.com/[email protected] > > To unsubscribe or change list options, see http://lists.andrelouis.com > > > > for archived list posts, see http://www.mail-archive.com/[email protected] > > > To unsubscribe or change list options, see http://lists.andrelouis.com > > for archived list posts, see http://www.mail-archive.com/[email protected] To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
