Does your midisport have only two sets of midi in and out ports, or 4?
If
it's only two, then there is a possible explanation. On the track
diolog,
you are only seeing your midi in ports, and that's normal. If you have 4
sets of both in and out, then some of the ports might be disabled.
As for local, for some reason with Casio and cheaper Yamaha keyboards,
trying to turn it off through the midi menu in QWS doesn't work. You'll
have to do it using the function menu on your keyboard. I can relate,
since
I also own a Casio product. If your keyboard doesn't have large print,
you
may have to arrow through the menu to find it while pressing your plus
and
minus buttons in order to see what each option does until you get to the
local setting.
Hope this works for you!!!
Seth.
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of
Joe
Giovanelli
Sent: Wednesday, May 06, 2015 6:04 PM
To: QWS list
Subject: Re: QWS List a few questions please
Hello, Juan,
Thanks to you I found the "preferred port" options under Options. It
worked.
There's something unusual about the ports menu. I see about 6 possible
ports, some input and some output. When I go to the "preferred ports"
option, I only see two or three ports. I don't know what to make of that.
As
said, it's a MIDISPORT, so perhaps all this will make sense to some of
you.
Again I thank you for your aid.
Joe Giovanelli
I understand that I should be able to create a track using control-ins.
No
track is created. I find, however, that if I go to the Tracks menu I can
create a new track by pressing I. Why can't I get the control-ins to
work?
I cannot turn off "local." I go to the MIDI menu and press L but nothing
happens.
I made a track and selected an instrument other than Piano, the default
on
my PX-350. Even though I couldn't tur Local off, I made a test recording
and
it played properly. I heard just the instrumented I selected for the
track.
----- Original Message -----
From: Juan Bello <[email protected]>
To: "QWS list" <[email protected]>
Date: Tuesday, May 5, 2015 19:34
Subject: Re: QWS List a few questions please
>
>
> hi, under the qws options there is a prefferred midi port selection
> list. Make sure the keyboard is connected before selecting the port
> and also before starting qws. You can also always go to the options
> menz and under ports check and uncheck the ports qws should use.
>
> 2015-05-05 18:04 GMT-05:00, Joe Giovanelli <[email protected]>:
> > Hello, Everybody,
> >
> > For many reasons I have not done any MIDI sequencing for more than
> > ten years. I've forgotten many thing, but I tried reading the QWS
> > instructions before writing you.
> >
> > Just in case it helps, I'm using a MIDISPORT and a Casio PX-350. The
> > computer runs Windows 7.
> >
> > 1. I set the desired port from the menu, but when I load a sequence,
> > all tracks use the Microsoft GS Wave Table. I had to go to each
> > tracks and assign the proper ports. I guess it comes down to how to
> > make those ports as the defaults for any sequence I load?
> >
> > I suppose I could ask other questions but this is my main difficulty
> > as I begin MIDI work.
> >
> > I thank you for any ideas here.
> >
> > Joe Giovanelli
> > To unsubscribe or change list options, see
> > http://lists.andrelouis.com
> >
> > for archived list posts, see
> > http://www.mail-archive.com/[email protected]
> >
>
>
>
> Juan Pablo Bello
> Cel. 313-879-2884
> To unsubscribe or change list options, see http://lists.andrelouis.com
>
> for archived list posts, see
> http://www.mail-archive.com/[email protected]
To unsubscribe or change list options, see http://lists.andrelouis.com
for archived list posts, see
http://www.mail-archive.com/[email protected]
To unsubscribe or change list options, see http://lists.andrelouis.com
for archived list posts, see
http://www.mail-archive.com/[email protected]
