Hi All
Actually, I have experienced this with a HP Designjet 350C and MI5/NT4 (not
5.5, just 5.0). I have never been able to trace down the problem but usually
turning the printer off and on and closing & reopening MI seems to solve it.
Maybe it has something to do with phases of the moon?
James
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 10, 1999 11:12 PM
To: 'Tony Shepherd'; 'MapInfo Email Group (E-mail)'
Subject: RE: MI 5.5 Printing again.
I too have experienced this problem and I think it has something to do with
the printer settings saved in workspaces.
The workaround (I think) is to open the workspace, change the number of
copies to the required amount, save the workspace, close all and then open
the workspace again.
Regards
Peter Graham
WS Group - Mackay
Ph: +61 7 4951 2911
Fx:: +61 7 4953 1319
E-mail: [EMAIL PROTECTED]
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Tony Shepherd
Sent: Wednesday, August 11, 1999 11:13 AM
To: MapInfo Email Group (E-mail)
Subject: MI 5.5 Printing again.
If I choose to print more than 1 copy of a layout and change the number
of copies in the print dialog box to say 5, I still only get one printed
copy! This has only happened since upgrading to MI 5.5, and I have even
reinstalled the plotter drivers. Sometime (but not always) I also get
the plotter counting down to zero (when plot nesting is turned on) then
it just sits there on zero and wont start, with the receiving data
light on.
Has anybody else had this?
I am using NT 4.0 and HP DesignJet 750C.
I am considering removing 5.5 and reinstalling V5.0 as printing seemed
to work.
Cheers
Tony
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tony Shepherd, GIS / IT Support
Gore District Council, Gore, New Zealand
Gore,The Brown Trout Capital
.. .. .. .. check out or sites! .. .. .. ..
.. . www.mataura.com . ..
.. . www.goredc.govt.nz . ..
- - - - - - - - - - - - - - - - - - - - - - - - - - -
----------------------------------------------------------------------
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
----------------------------------------------------------------------
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
----------------------------------------------------------------------
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
