Hi Bill, My understanding is that when converting to GDA94, you need to use a method that incorporates an NTV2 distortion modelling grid. Otherwise you will get errors in the order of 2 - 3 metres.
MapInfo does not use this grid, but other products do. Check out GDA Converter at www.petermeier.com.au. The latest version of FME may also use the grid. Cheers, Simon -------------------------------------------- Simon O'Keefe GIS & Mapping Specialist Groundtruth mobile: +61 409 413 890 office: +61 3 5345 3966 mail: PO Box 290 Clunes VIC 3370 Australia ------------------------------------------- -----Original Message----- From: Data Directions [mailto:[EMAIL PROTECTED] Sent: Thursday, 18 December 2003 3:12 PM To: [EMAIL PROTECTED] Subject: MI-L Australian GDA94 projection issues I have been having all sorts of problems with converting Australian projections between AGD84 and GDA94, both as spherical and cartesian coordinates. I have MapInfo data in AGD84. I go through the conversion process to GDA94 using various methods (FME some time ago, and now via ESRI ArcTools) and end up with a dataset projected in GDA94. However, when I overlay this data with the original AGD84 data, there is only about a 3 metre offset, not the 200 metre offset that it should be. But if during the conversion process, I set the coordinate system to GDA94 again, and then overlay the original GDA94 data with the converted data, there is the 200 metre (or so offset). In a nutshell, my processing steps are: 1.. From MapInfo, export the source AGD84 table as MID/MIF format. 2.. In ArcToolBox, convert the MIF to a Shapefile, assign the source projection (AGD84) and then specify the projection going to (GDA94). 3.. Go back to MapInfo (v7.5) and import the Shapefile, selecting GDA94 as the projection. This results in only a 3 metre offset. But at this stage, if I import the Shapefile and select AGD84 (the original projection), the 200 metre offset is apparent. Are there any ideas what is going on? Will sum. Many thanks, Bill --------------------------------------------------------------------- List hosting provided by Directions Magazine | www.directionsmag.com | To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Message number: 9620
