Hi Every One,
I am running AC Power flow using Newton Raphson method for IEEE 14 bus system,
I am using following command:
results = runpf('case14');
When i get the results I see total reactive Power Injection [Q (MVAr)
Generation = 82.44] and total consumed reactive Power [Q (MVAr) Load = 73.50].
If we subtract consumed reactive power from injected reactive power we get the
Loss.
Total Reactive Power Loss = Total Reactive Power Injection - Total Reactive
Power Consumption = 82.44 - 73.5 = 8.94 MVAR
where as AC load Flow is giving 54.54 MVAR, Can any one explain why this loss
is coming wrong.
Best Regards,
Muhammad Faraz Sahito
Graduate Student | Electrical Department
Save a tree. Don't print this e-mail unless it's really necessary
