Hi everyone, Happy new year. I want to simulate the following scenarios on distribution grid (case33) in MATPOWER. I would be so grateful if you could help me in this regard.
1) How can I add DGs in distribution grid to increase voltage stability? How can I see the effect of wrong DG placement there? I mean a DG which should be installed in one place to support 4 buses, is installed in a place that only supports 3 buses and one of the buses which should be supported is not supported. So I want to see the effect on voltage magnitude of that unsupported bus. 2) Where can I find load values for distribution grid to be able to have different runs and different outputs? 3) How can I change the value of power loss (increase and decrease) and see its effect on different parameter values like voltage magnitudes? 4) When a total loss in the distribution network is decreased, the generation in the real world also should be decreased and adapted to that loss. I mean the power loss in the network and one generation of that network. How can I calculate the new generation value with considering the new loss value to be able to change in MATPOWER? (Also about increase of loss). Because the generation amount is a constant number in MATPOWER. Thank you so much for your consideration and help. Kind regards, Arkan
