I’m not sure any of these are really MATPOWER-specific questions. For more
general power systems research related questions, please find a more
appropriate forum.
If you do have MATPOWER-specific questions, please feel free to submit them
here.
Thanks,
Ray
> On Jan 2, 2018, at 3:38 PM, Arkan Arkan <[email protected]> wrote:
>
> Hi everyone,
>
> Happy new year. I want to simulate the following scenarios on distribution
> grid (case33) in MATPOWER. I would be so grateful if you could help me in
> this regard.
>
> 1) How can I add DGs in distribution grid to increase voltage stability? How
> can I see the effect of wrong DG placement there? I mean a DG which should be
> installed in one place to support 4 buses, is installed in a place that only
> supports 3 buses and one of the buses which should be supported is not
> supported. So I want to see the effect on voltage magnitude of that
> unsupported bus.
>
> 2) Where can I find load values for distribution grid to be able to have
> different runs and different outputs?
>
> 3) How can I change the value of power loss (increase and decrease) and see
> its effect on different parameter values like voltage magnitudes?
>
> 4) When a total loss in the distribution network is decreased, the
> generation in the real world also should be decreased and adapted to that
> loss. I mean the power loss in the network and one generation of that
> network. How can I calculate the new generation value with considering the
> new loss value to be able to change in MATPOWER? (Also about increase of
> loss). Because the generation amount is a constant number in MATPOWER.
>
>
> Thank you so much for your consideration and help.
>
> Kind regards,
> Arkan
