Dear Ray, Thank you. Actually, I want to simulate and do them in MATPOWER case file in case file "case33bw".
Thank you for your consideration. Kind regards, Arkan On Mon, Jan 8, 2018 at 11:13 AM, Ray Zimmerman <[email protected]> wrote: > I’m not sure any of these are really MATPOWER-specific questions. For more > general power systems research related questions, please find a more > appropriate forum. > > If you do have MATPOWER-specific questions, please feel free to submit > them here. > > Thanks, > > Ray > > > > > On Jan 2, 2018, at 3:38 PM, Arkan Arkan <[email protected]> wrote: > > > > Hi everyone, > > > > Happy new year. I want to simulate the following scenarios on > distribution grid (case33) in MATPOWER. I would be so grateful if you could > help me in this regard. > > > > 1) How can I add DGs in distribution grid to increase voltage stability? > How can I see the effect of wrong DG placement there? I mean a DG which > should be installed in one place to support 4 buses, is installed in a > place that only supports 3 buses and one of the buses which should be > supported is not supported. So I want to see the effect on voltage > magnitude of that unsupported bus. > > > > 2) Where can I find load values for distribution grid to be able to have > different runs and different outputs? > > > > 3) How can I change the value of power loss (increase and decrease) and > see its effect on different parameter values like voltage magnitudes? > > > > 4) When a total loss in the distribution network is decreased, the > generation in the real world also should be decreased and adapted to that > loss. I mean the power loss in the network and one generation of that > network. How can I calculate the new generation value with considering the > new loss value to be able to change in MATPOWER? (Also about increase of > loss). Because the generation amount is a constant number in MATPOWER. > > > > > > Thank you so much for your consideration and help. > > > > Kind regards, > > Arkan > > > >
