I have gotten this working on matterhorn 1.2.
However, it does do something weird. I get:
WARNING : Recording may have failed to start or ingest!
It seems the core system did not recieve proper status updates from the
Capture Agent that should have conducted this recording.
When it starts recording. Then at some point later the video shows up.
On 10/4/11 8:04 AM, Benjamin Wulff wrote:
Hi all,
I just update the firmware of our MCA to version 2.2.0e. In contrast to
version 2.2.0c the device now registers itself with the 1.1 Matterhorn
Core. So far so good. When I first tried to schedule a recoding the
device state in the 'Capture Agents' tab switch to 'capturing' at the
appropriate time but it didn't stop and stayed in state 'capturing'.
Also I didn't find any recorded files in the MCAs web UI. When I
rebooted the device the state switched back to 'idle' and new events
seem to be ignored.
Does the 2.2.0e firmware work for someone else?
Btw. I also tried a 1.2 Core. When trying to schedule an event I got the
error message that no inputs were selected though there's nothing to
select under 'Inputs' because there's only the message 'agent defaults
will be used'.
Best,
Benjamin
PS, here's what I did in detail:
- disconnected camera/vga
- reseted the MCA to factory defaults
- rebooted the MCA
- uploaded firmware
- rebooted the device (following the instruction in the success message)
- in /admin -> 'Date and Time': set time manually to local time
- configured the MH1.1 core (device showed up under 'Capture Agents')
- re-connected camera/vga
- scheduled an event in Matterhorn
_______________________________________________
Matterhorn-users mailing list
[email protected]
http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
_______________________________________________
Matterhorn-users mailing list
[email protected]
http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
