I did a number of capture tests today morning, and it seems to me that the
device is working (almost).
Here my observations so far:
what is working:
i) the device starts and complete the capture up to the second, and the
nice thing (I did not noticed before) is the blue light coming on the box
during the capture
ii) the screen capture quality on the DVI channel is very good even for the
bitrate 600kbits and 15 frames/sec
but for the acceptable video channel quality, the bitrate must be at
least 2500kbits with 25 frames/sec
iii) picture-in-picture recording is working fine for:
video outside DVI and video inside DVI
what is not working:
i) the independent streams selection is not working properly showing
only one channel, like that:
when the both channel are selected then Screen is only recorded (not
Screen and the Camera)
when the Screen is selected the Video cannel is recorded! I did this
test twice to be sure.
but when Camera is selected the video channel is recorded (so OK).
I would like to have two independent streams recorded and played if this is
possible.
I have not tested the audio channel yet.
The main problem still is the long time lag before the processing has started.
The captured recording are staying in the 'Capturing' table showing the status
'capturing' (the workflow instance state is PAUSED then).
In one case all jobs have started after 35min, but in another case the jobs
started after about 45 min or even longer.
Is it a setup somewhere, which obviously I don't know, that can shorten this
lag?
There is a warning I am getting frequently, which might be responsible:
WARN(ScheduleServiceImpl:930) Could not validate Calendar: Calendar must
contain at least one component.
In summary, the EDC is finally working, and the above I believe are minor
issues that can be easily rectified.
So many thanks to Greg for his work!
Leslaw
On Nov 23, 2011, at 5:16 PM, Greg Logan wrote:
> Hi folks,
>
> The updated firmware was released yesterday, and after testing overnight
> the update appears to have fixed the current issues. Please update your
> device with the firmware from
> www.epiphan.com/downloads/firmware/Davinci_Matterhorn/beta.php.
>
> G
>
> _______________________________________________
> Matterhorn-users mailing list
> [email protected]
> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
_______________________________________________
Matterhorn-users mailing list
[email protected]
http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
