Thanks Leslaw
I had a successful recording, and it processed properly and displayed in Engage. Is there any way to reduce the ingest/digest time? It took around 45 minutes after completion of recording until it came to Engage. From: [email protected] [mailto:[email protected]] On Behalf Of Dr Leslaw Zieleznik Sent: Thursday, December 08, 2011 4:14 PM To: Matterhorn Users Subject: Re: [Matterhorn-users] MattherHorn 1.2 and Epiphan Capture Appliance Updates and Issues -- New User Reza, I am going quite high with the resolution because we are using the DVI equipment, so my setup is: For DVI channel Frame size: [1600 x 1024 \/] Key frame interval: 5 Limit frame rate: 10 Bitrate: 4096 kbits but if you are using XVGA, then the bit rate can go down to 2048. And for Video channel: Frame size: [640 x 480 \/] Key frame interval: 1 Limit frame rate: 18 Bitrate: 4096 kbits Interval between VGA signals autoadjastments: 60 secs The same, but with no offset and no gain. Leslaw On 8 Dec 2011, at 11:19, VISIONAIRE-Reza Toghraee wrote: Dear Dr Leslaw How is your VGA/DVI configuration? I have connected a machine with 1024x768 resolution and here is my FrameGrabber settings: Interval between VGA signals autoadjastments: 60 secs Offset: 30 Gain: 185
_______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
