On 11-12-08 03:00 AM, Dr Leslaw Zieleznik wrote: >> Calendar Polling Interval: 1 minuet >> Agent State Push Interval: 60 seconds >> Ingest Interval : 2 minutes (I changed it from 60 minutes to 2 minute to >> speedup the ingest) > > I am using a similar setup: 2, 60, 5.
For the record, the reason the calendar polling interval is so large by default is that it is a fairly expensive operation internally. If your calendar data is not changing that quickly (eg: production use) then a larger polling interval should be used. G > Best, > Leslaw > > > On 1 Dec 2011, at 14:30, Dr Leslaw Zieleznik wrote: > >> >> I have finally the ECD working fine, recording two independent streams. >> And it is diffucult to believe how this has happened? :) >> >> I have simply connected a microphone, activated the audio and then >> rebooted device, just for the purpose of testing the audio. And this >> somehow did trigger two streams recording. I think it means that the >> audio need to be enabled (!) >> I wonder if you can repeat the same on your device? >> >> As far as the video quality is concern, the recording quality is much >> better when 'independent streams' option is selected - the video >> quality is much worse when the 'video outside DVI/VGA' is used. >> >> By the way, I am using the f/w version v2.2.3 which I have downloaded >> on Monday. >> This has not been advertised for download yet - I am sorry Greg! >> >> >> Leslaw >> > > > > On 8 Dec 2011, at 07:45, VISIONAIRE-Reza Toghraee wrote: > >> Hi folks >> >> I got a Epiphan MatterHorn Capture Appliance (made for MatterHorn aka >> MCA) >> 3 days back. I was struggling to make it working with MatterHorn, which >> finally I did it, but Im facing some issues which appreciate your thoughts >> on that. >> >> I installed a very clean MatterHorn 1.2 on Ubuntu 10.10 server-i386 >> 32bit, >> on my VMware Workstation 8 installed on my Windows 7 (host). >> On MCA (firmware 2.2.0e) , I configured my server URL (ie >> 192.168.110.87:8080) and the account username and password which was >> specified in my config.properties. (matterhorn_system_account, CHANGE_ME) >> So the first couple of hours I was trying to Register the MCA inside the >> Core server, which was not happening. I played a lot with URL, >> username and >> password, but no luck. >> So finally I ran the wireshark on my NIC card and saw that the MCA is >> trying >> to register into MCA by seding a POST HTTP request to >> http://192.168.110.87:8080/capture-admin/agents/rest. >> Finally I understood that this URL is not valid in matterhorn and is >> changed >> to http://192.168.110.87:8080/capture-admin/agents. >> So finally I was very lucky to find the Epiphan download page for Beta >> software, and I downloaded the Firmware version 2.2.3 which is a beta one. >> (http://www.epiphan.com/downloads/firmware/Davinci_Matterhorn/beta.php) >> >> >> After installation of firmware and rebooting the MCA (by the way I >> rebooted >> the MCA manually, as MCA doesn't reboot by itself after software upgrade, >> neither doesn't show any message for successful receiving the new >> firmware) >> the MCA registered in MatterHorn CORE. (Yes what a lovely time, at 2AM). >> Then I stuck in another thig which was Capturing. I was scheduling the >> recording, but MCA was not being informed to record. >> Finally I found that there is a Calendar service, which the MCA has to >> poll >> (by default every 60 minutes!) to retrieve its recoding schedule. >> I changed the Calendar Polling Interval from 60 minutes to 1 minute, >> and it >> fixed the problem. >> >> Now I can schedule the recordings, and MCA starts the recording. But I >> have >> some issues which seek your geeky help: >> >> 0- till now, after recording more than 10 times, I couldn't manage to have >> the complete result of recording (Video + VGA + Audio) in Engage. >> 1- sometimes when recording has to be finished, the server still shows >> that >> the MCA is in Capturing state. I don't understand why the status is not >> being updated. >> 2- sometimes after the recording, it shows the recording as Finished, >> but I >> cannot see it on Engage, it shows media is not available. >> 3- almost most of the times, when the MCA ingests the file to the Core and >> Core starts digesting, usually it fails in 'Text Extraction" Phase. Is >> there >> any way to skip the text extraction phase while digesting? >> 4- When I try to test the Text Analysis REST docs, I upload a image (jpeg, >> bmp, tif, gif) to system, but it gives me an error caused by URLDECODER >> because of finding the '%' (percentage) character in URL. Since the >> file is >> being POST ed to the server the URLDECODER analyses the whole file as >> a URL, >> and since file is binary, there are lots of '%' inside it. >> >> >> Here is the MatterHorn configuration on MCA: >> >> Calendar Polling Interval: 1 minuet >> Agent State Push Interval: 60 seconds >> Ingest Interval : 2 minutes (I changed it from 60 minutes to 2 minute to >> speedup the ingest) >> >> >> Any help, comment highly appreciated. >> >> Thanks >> Reza Toghraee >> >> >> >> _______________________________________________ >> Matterhorn-users mailing list >> [email protected] >> <mailto:[email protected]> >> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users > > > > > > > _______________________________________________ > Matterhorn-users mailing list > [email protected] > http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
