On 12-02-10 12:05 PM, Dr Leslaw Zieleznik wrote: > > Yes, I definitely did, and rebooted after my setup, I did also rebooted the > server. > It worked fine before the f.w update. > It should not be affected that I am still on 1.2?
The APIs have not changed between 1.2 and 1.3, so that should not have any affect. Is the ECD on a public IP? I can log in and take a look. G > Leslaw > > On 10 Feb 2012, at 16:58, Greg Logan wrote: > >> On 12-02-10 09:35 AM, Dr Leslaw Zieleznik wrote: >>> Greg, >>> >>> I have installed the patched f/w today and I have found, that: >>> >>> i) there is quite visible improvement in quality on both video and >>> VGA/DVI channels, which is a nice surprise! >>> ii) it is a slight shift to the right on both channels, which frame >>> grabber settings can't eliminate, bit I can live with it. >>> >>> But the problem is that, I can't start the capture agent though it is >>> registered on the core. It stays idle all the time, and at the capture >>> start time I am getting the message: >>> >>> ""WARNING : Recording may have failed to start or ingest! >>> It seems the core system did not receive proper status updates from >>> the Capture Agent that should have conducted this recording"" >>> >>> I did try to start recording many times with different setup on the >>> agent, changing the pooling interval, ingest interval and also stream >>> setups, without any success. >> >> Did you reset the device to factory defaults after updating the >> firmware? This is something that needs to be done every time you flash. >> The version I posted works as expected for me... >> >> G >> >>> >>> Is it anything else I can try? >>> >>> Thanks, >>> >>> Leslaw >>> >>> >>> >>> On Feb 8, 2012, at 10:20 PM, Greg Logan wrote: >>> >>>> On 12-02-05 11:52 AM, Dr Leslaw Zieleznik wrote: >>>>> >>>>> I'd like to notify about the problem we have noticed during the last >>>>> week recordings. >>>>> >>>>> Our observation is that when the capture time is longer then 45min, >>>>> the workflow remains in the PAUSE state - the Capturing displays the >>>>> status Capturing - and it stays like that forever. >>>>> Otherwise the capture agent behaves properly, changing the status >>>>> from Idle to Capturing and back to Idle correctly with the recording >>>>> time. >>>>> >>>>> I suspect this is something to do with the current ECD f/w, so we >>>>> simply need to wait for the coming rel 2.3? >>>> >>>> This is really odd, I'm seeing that behavior as well. The file is >>>> captured, but during ingest it is not included in the zip file. This >>>> causes an exception during ingest if you check your core's logs. This >>>> functionality worked before, so the only thing I can think of is that >>>> the zip tool changed underneath me. The current firmware version >>>> contains an error in the ingest scripts which is actually losing that >>>> data. I have created a patched firmware version available at >>>> http://aries.usask.ca/epiphan/ which will prevent the loss of data, >>>> however the underlying issue of passing the data to the core remains. >>>> I've sent an email to Epiphan about this and I hope to hear back soon. >>>> >>>> In the mean time, I would install the above firmware (which includes the >>>> new features I outlined at Oxford). >>>> >>>> G >>>> >>>>> Leslaw >>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Matterhorn-users mailing list >>>>> [email protected] >>>>> <mailto:[email protected]> >>>>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >>>>> >>>> >>>> >>>> _______________________________________________ >>>> Matterhorn-users mailing list >>>> [email protected] >>>> <mailto:[email protected]> >>>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >>> >>> >>> >>> _______________________________________________ >>> Matterhorn-users mailing list >>> [email protected] >>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >> >> >> _______________________________________________ >> Matterhorn-users mailing list >> [email protected] >> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users > > > > _______________________________________________ > Matterhorn-users mailing list > [email protected] > http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
