> Is the ECD on a public IP? I am afraid is not. But, I can try to look into or send you the logfile if tell you me which part you are interested in. Can you wait with it till Monday? Otherwise I might reinstall the f/w again.
Leslaw On 10 Feb 2012, at 19:24, Greg Logan wrote: > On 12-02-10 12:05 PM, Dr Leslaw Zieleznik wrote: >> >> Yes, I definitely did, and rebooted after my setup, I did also rebooted the >> server. >> It worked fine before the f.w update. >> It should not be affected that I am still on 1.2? > > The APIs have not changed between 1.2 and 1.3, so that should not have > any affect. Is the ECD on a public IP? I can log in and take a look. > > G > >> Leslaw >> >> On 10 Feb 2012, at 16:58, Greg Logan wrote: >> >>> On 12-02-10 09:35 AM, Dr Leslaw Zieleznik wrote: >>>> Greg, >>>> >>>> I have installed the patched f/w today and I have found, that: >>>> >>>> i) there is quite visible improvement in quality on both video and >>>> VGA/DVI channels, which is a nice surprise! >>>> ii) it is a slight shift to the right on both channels, which frame >>>> grabber settings can't eliminate, bit I can live with it. >>>> >>>> But the problem is that, I can't start the capture agent though it is >>>> registered on the core. It stays idle all the time, and at the capture >>>> start time I am getting the message: >>>> >>>> ""WARNING : Recording may have failed to start or ingest! >>>> It seems the core system did not receive proper status updates from >>>> the Capture Agent that should have conducted this recording"" >>>> >>>> I did try to start recording many times with different setup on the >>>> agent, changing the pooling interval, ingest interval and also stream >>>> setups, without any success. >>> >>> Did you reset the device to factory defaults after updating the >>> firmware? This is something that needs to be done every time you flash. >>> The version I posted works as expected for me... >>> >>> G >>> >>>> >>>> Is it anything else I can try? >>>> >>>> Thanks, >>>> >>>> Leslaw >>>> >>>> >>>> >>>> On Feb 8, 2012, at 10:20 PM, Greg Logan wrote: >>>> >>>>> On 12-02-05 11:52 AM, Dr Leslaw Zieleznik wrote: >>>>>> >>>>>> I'd like to notify about the problem we have noticed during the last >>>>>> week recordings. >>>>>> >>>>>> Our observation is that when the capture time is longer then 45min, >>>>>> the workflow remains in the PAUSE state - the Capturing displays the >>>>>> status Capturing - and it stays like that forever. >>>>>> Otherwise the capture agent behaves properly, changing the status >>>>>> from Idle to Capturing and back to Idle correctly with the recording >>>>>> time. >>>>>> >>>>>> I suspect this is something to do with the current ECD f/w, so we >>>>>> simply need to wait for the coming rel 2.3? >>>>> >>>>> This is really odd, I'm seeing that behavior as well. The file is >>>>> captured, but during ingest it is not included in the zip file. This >>>>> causes an exception during ingest if you check your core's logs. This >>>>> functionality worked before, so the only thing I can think of is that >>>>> the zip tool changed underneath me. The current firmware version >>>>> contains an error in the ingest scripts which is actually losing that >>>>> data. I have created a patched firmware version available at >>>>> http://aries.usask.ca/epiphan/ which will prevent the loss of data, >>>>> however the underlying issue of passing the data to the core remains. >>>>> I've sent an email to Epiphan about this and I hope to hear back soon. >>>>> >>>>> In the mean time, I would install the above firmware (which includes the >>>>> new features I outlined at Oxford). >>>>> >>>>> G >>>>> >>>>>> Leslaw >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Matterhorn-users mailing list >>>>>> [email protected] >>>>>> <mailto:[email protected]> >>>>>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >>>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Matterhorn-users mailing list >>>>> [email protected] >>>>> <mailto:[email protected]> >>>>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >>>> >>>> >>>> >>>> _______________________________________________ >>>> Matterhorn-users mailing list >>>> [email protected] >>>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >>> >>> >>> _______________________________________________ >>> Matterhorn-users mailing list >>> [email protected] >>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >> >> >> >> _______________________________________________ >> Matterhorn-users mailing list >> [email protected] >> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users > > > _______________________________________________ > Matterhorn-users mailing list > [email protected] > http://lists.opencastproject.org/mailman/listinfo/matterhorn-users Dr Leslaw Zieleznik OBIS (Oxford Brookes Information Solutions) Oxford Brookes University [email protected] Tel: +44 (0)1865 483973 _______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
