We are having problems getting all characters to print on the UB04 form. The
last character (character 83) on some lines, specifically FL41 (Value
Codes/Amount) line and FL65 (Employer Name) line, is truncating the
last/right-most character in those fields.
We are using an HP 4250n, with and ELF entry in the Electronic Forms
Dictionary, to print on cut-sheet pre-printed forms, and the line-up is
perfect. So we are fairly sure that these definitions are correct. However,
the print is still dropping/truncating the right-most character. And MEDITECH
is no help at this stage.
Our print settings are as follows:
HP 4250n Printer Quality (edge-to-edge) settings:
X1 (horizatonal centering) is set to -10
Y (vertical centering) is set to 0
ELF Dictionary settings (which are also MEDITECH's recommendations):
CPI: 10.05
Left Margin: 0.20
LPI: 6
Top Margin: 0.095
I have tried probably 50 or 60 different combinations of the the X1/Y and ELF
settings to try to get it to print correctly, but these are the only settings
that work for alignment purposes on this printer. Yet, using these settings is
always dropping right-most character.
Is anyone using an HP 4250n with an ELF Dictionary entry to print on
pre-printed cut-sheet forms, and are your forms printing correctly? Are there
other settings that we are missing that might impact the right
margin/truncation issue? If so, could you share your Printer and ELF settings
with us?
Thank you.
Gary J. Ring
Strategic Resource Group, Inc.
11 Jones Road, Peabody, MA 01960
978-807-1573=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
To subscribe or unsubscribe to the meditech-l, visit MTUsers.NET.
To check the status of the meditech-l, visit MTUsers.NET.
For help, email [EMAIL PROTECTED]
Visit the MTUsers WikiPedia at MTUsers.NET/mwiki
______________________________________
meditech-l mailing list
[email protected]
http://mtusers.com/mailman/listinfo/meditech-l
