From: Roger Quadros <[email protected]> Patch-mainline: 2.6.35? Git-repo: http://www.gitorious.org/linux-omap-dss2/linux/commit/a77ee8b332b62f3b10ffc15b27b889adf50cd013
The Touch controller and LCD Panel share the same SPI bus 1. So, we need to define the touch controller in the SPI board info else, the SPI bus will be contended due to invalid state of Touch controller's Chip Select thus preventing the LCD panel from working. Signed-off-by: Roger Quadros <[email protected]> --- arch/arm/mach-omap2/board-rx51-peripherals.c | 15 +++++++++++++++ 1 files changed, 15 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 6a41a0a..bdb1c54 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -46,6 +46,7 @@ enum { RX51_SPI_WL1251, RX51_SPI_MIPID, /* LCD panel */ + RX51_SPI_TSC2005, /* Touch Controller */ }; static struct wl12xx_platform_data wl1251_pdata; @@ -60,6 +61,11 @@ static struct omap2_mcspi_device_config mipid_mcspi_config = { .single_channel = 1, }; +static struct omap2_mcspi_device_config tsc2005_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, +}; + static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { [RX51_SPI_WL1251] = { .modalias = "wl1251", @@ -77,6 +83,15 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .max_speed_hz = 6000000, .controller_data = &mipid_mcspi_config, }, + [RX51_SPI_TSC2005] = { + .modalias = "tsc2005", + .bus_num = 1, + .chip_select = 0, + /* .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),*/ + .max_speed_hz = 6000000, + .controller_data = &tsc2005_mcspi_config, + /* .platform_data = &tsc2005_config,*/ + }, }; #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -- 1.6.0.4 _______________________________________________ MeeGo-dev mailing list [email protected] http://lists.meego.com/listinfo/meego-dev
