HI Nelson,
please refer to the attachment for the log file.
2010/9/25 Robert Nelson <[email protected]>
> On Sat, Sep 25, 2010 at 4:31 AM, gw zhang <[email protected]> wrote:
> > Great! It works well for me!
> >
> > Sorry for a stupid question: Before you give the patches for
> devkit8000, I
> > struggle for it for a long time. I don't know how to porting for a
> specific
> > board, what knowledge should I have to generate patches for devkit8000 if
> > you don't give it?
>
> Oh i cheated on that one and didn't really do any work, those were the
> patches merged in 2.6.36-rc's for the devkit8000..
>
> from git i did:
>
> git format-patch -18 arch/arm/mach-omap2/board-devkit8000.c
>
> and only the first 11 are appropriate, as 12-16 are bits from the omap
> merge for 2.6.36..
>
> btw, can you do Chen and I a favor...
>
> I need a complete boot log for comparison on a working devkit8000..
> Using cutecom or a serial terminal that logs to a file..
>
> Start logging..
> Power up board
> Stop u-boot: type "printenv"
> reboot the board
> wait till login prompt shows up.
> un power board
> stop logging
>
> pastebin the file..
>
> Regards,
>
> --
> Robert Nelson
> http://www.rcn-ee.com/
>
bootdelay=3
baudrate=115200
loadaddr=0x82000000
vram=12M
dvimode=1024x768mr...@60
defaultdisplay=dvi
nfsopts=hard,tcp,rsize=65536,wsize=65536
kernelopts=rw
mmcargs=run commonargs; setenv bootargs ${bootargs} root=/dev/mmcblk0p2 ${kernelopts}
nandargs=run commonargs; setenv bootargs ${bootargs} omapfb.mode=dvi:${dvimode} omapdss.def_disp=${defaultdis
play} root=/dev/mtdblock4 rootfstype=jffs2 ${kernelopts}
netargs=run commonargs; setenv bootargs ${bootargs} root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts}
ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off ${kernelopts} dnsip1=${dnsip} dnsip2=${dnsi
p2}
loadbootscript=fatload mmc 0 ${loadaddr} boot.scr
bootscript=echo Running bootscript from mmc ...; source ${loadaddr}
loaduimage=fatload mmc 0 ${loadaddr} uImage
eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000
mmcboot=echo Booting from mmc ...; run mmcargs; bootm ${loadaddr}
nandboot=echo Booting from nand ...; run nandargs; nand read ${loadaddr} 280000 400000; bootm ${loadaddr}
netboot=echo Booting from network ...; dhcp ${loadaddr}; run netargs; bootm ${loadaddr}
autoboot=if mmc init 0; then if run loadbootscript; then run bootscript; else if run loaduimage; then run mmc
boot; else run nandboot; fi; fi; else run nandboot; fi
ethaddr=02:bd:03:01:80:14
dieid#=378000040000000004036abd03018014
ethact=dm9000
bootargs=console=ttyS2,115200n8 root=/dev/raminitrd=0x81600000,40M video=omapfb:mode:720p60
bootcmd=run autoboot
console=ttyS2,115200n8
commonargs=setenv bootargs console=ttyS2,115200n8 vram=8M omapfb.vram=4M,4M omapfb.mode=dvi:1024x768mr...@60
omapfb.debug=1 omapdss.def_disp=dvi omapdss.debug=1
stdin=serial
stdout=serial
stderr=serial
Environment size: 1701/131068 bytes
OMAP3 DevKit8000 # run autoboot
mmc0 is available
reading boot.scr
388 bytes read
Running bootscript from mmc ...
## Executing script at 82000000
dm9000 i/o: 0x2c000000, id: 0x90000a46
DM9000: running in 16 bit mode
MAC: 02:bd:03:01:80:14
operating at 100M full duplex mode
Using dm9000 device
TFTP from server 192.168.128.44; our IP address is 192.168.128.53
Filename 'uImage'.
Load address: 0x82000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#############################################
done
Bytes transferred = 4474448 (444650 hex)
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-2.6.35.5-x4.1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4474384 Bytes = 4.3 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35.5-x4.1 (devic...@ubuntu) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202
) ) #1 PREEMPT Sat Sep 25 16:11:31 CST 2010
[ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: OMAP3 Devkit8000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[ 0.000000] Reserving 8388608 bytes SDRAM for VRAM
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS2,115200n8 vram=8M omapfb.vram=4M,4M omapfb.mode=dvi:1024x768
mr...@60 omapfb.debug=1 omapdss.def_disp=dvi omapdss.debug=1 rootwait root=/dev/nfs nfsroot=192.168.128.44:/r
oot/work/nfs,hard,tcp,rsize=65536,wsize=65536 ip=dhcp rw
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] allocated 1310720 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 128MB 128MB = 256MB total
[ 0.000000] Memory: 234408k/234408k available, 27736k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0049000 ( 260 kB)
[ 0.000000] .text : 0xc0049000 - 0xc0812000 (7972 kB)
[ 0.000000] .data : 0xc088c000 - 0xc08eb9c0 ( 383 kB)
[ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:402
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/266/500 MHz
[ 0.000000] omap_hwmod: l3_hwmod: cannot be enabled (3)
[ 0.000000] omap_hwmod: l4_core_hwmod: cannot be enabled (3)
[ 0.000000] omap_hwmod: l4_per_hwmod: cannot be enabled (3)
[ 0.000000] omap_hwmod: l4_wkup_hwmod: cannot be enabled (3)
[ 0.000000] Reprogramming SDRC clock to 266000000 Hz
[ 0.000000] dpll3_m2_clk rate change failed: -22
[ 0.000000] GPMC revision 5.0
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Calibrating delay loop... 484.21 BogoMIPS (lpj=1892352)
[ 0.000000] pid_max: default: 32768 minimum: 301
[ 0.000000] Security Framework initialized
[ 0.000000] Smack: Initializing.
[ 0.000000] Mount-cache hash table entries: 512
[ 0.000000] Initializing cgroup subsys ns
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Initializing cgroup subsys memory
[ 0.000000] Initializing cgroup subsys devices
[ 0.000000] Initializing cgroup subsys freezer
[ 0.000000] CPU: Testing write buffer coherency: ok
[ 0.000000] regulator: core version 0.5
[ 0.000000] NET: Registered protocol family 16
[ 0.000000] Found NAND on CS0
[ 0.000000] Registering NAND on CS0
[ 0.000000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.000213] OMAP DMA hardware revision 4.0
[ 0.000640] omap-mcpdm omap-mcpdm: unable to get pdm_ck: -2
[ 0.000701] omap-mcpdm: probe of omap-mcpdm failed with error -2
[ 0.007690] bio: create slab <bio-0> at 0
[ 0.009002] SCSI subsystem initialized
[ 0.010650] usbcore: registered new interface driver usbfs
[ 0.010864] usbcore: registered new interface driver hub
[ 0.011138] usbcore: registered new device driver usb
[ 0.011566] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
[ 0.014587] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.014617] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.015197] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.018341] regulator: VUSB1V5: 1500 mV normal standby
[ 0.018798] regulator: VUSB1V8: 1800 mV normal standby
[ 0.019195] regulator: VUSB3V1: 3100 mV normal standby
[ 0.020904] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 0.021820] regulator: VPLL1: 1800 mV normal standby
[ 0.023498] regulator: VIO: 1800 mV normal standby
[ 0.024047] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
[ 0.024200] twl_reg twl_reg.6: can't register VMMC1, -22
[ 0.024230] twl_reg: probe of twl_reg.6 failed with error -22
[ 0.024505] regulator: VDAC: 1800 mV normal standby
[ 0.024780] i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
[ 0.025939] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.026641] NetLabel: Initializing
[ 0.026641] NetLabel: domain hash size = 128
[ 0.026672] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.026794] NetLabel: unlabeled traffic allowed by default
[ 0.026824] Switching to clocksource 32k_counter
[ 0.051879] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
[ 0.058593] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[ 0.059020] NET: Registered protocol family 2
[ 0.059356] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.060516] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.060760] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.060882] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.060913] TCP reno registered
[ 0.060943] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.060974] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.061279] NET: Registered protocol family 1
[ 0.061828] RPC: Registered udp transport module.
[ 0.061859] RPC: Registered tcp transport module.
[ 0.061889] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.063049] PMU: registered new PMU device of type 0
[ 0.063171] dspbridge_init: 600000 bytes @ 81400000
[ 0.063873] audit: initializing netlink socket (disabled)
[ 0.063964] type=2000 audit(0.242:1): initialized
[ 0.254516] VFS: Disk quotas dquot_6.5.2
[ 0.254974] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.261657] fuse init (API version 7.14)
[ 0.263854] Btrfs loaded
[ 0.263916] msgmni has been set to 457
[ 0.266876] alg: No test for stdrng (krng)
[ 0.267486] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.267517] io scheduler noop registered
[ 0.267547] io scheduler deadline registered
[ 0.267700] io scheduler cfq registered (default)
[ 0.323974] OMAP DSS rev 2.0
[ 0.324096] OMAP DISPC rev 3.0
[ 0.324157] OMAP VENC rev 2
[ 0.653411] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.674194] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
[ 0.694213] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
[ 0.714202] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
[ 1.406768] console [ttyS2] enabled
[ 1.418884] brd: module loaded
[ 1.426269] loop: module loaded
[ 1.431274] omap2-nand driver initializing
[ 1.435607] omap2-nand: probe of omap2-nand failed with error -16
[ 1.441986] OneNAND driver initializing
[ 1.446319] dm9000 Ethernet Driver, V1.31
[ 1.544036] eth0: dm9000a at d080c000,d0810400 IRQ 185 MAC: 02:bd:03:01:80:14 (chip)
[ 1.552124] usbcore: registered new interface driver cdc_ether
[ 1.558105] usbcore: registered new interface driver rndis_host
[ 1.564788] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.571716] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 1.577789] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 1.585479] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 1.605194] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 1.611785] hub 1-0:1.0: USB hub found
[ 1.615661] hub 1-0:1.0: 3 ports detected
[ 1.644348] Initializing USB Mass Storage driver...
[ 1.649444] usbcore: registered new interface driver usb-storage
[ 1.655517] USB Mass Storage support registered.
[ 1.660278] g_ether gadget: using random self ethernet address
[ 1.666168] g_ether gadget: using random host ethernet address
[ 1.673461] usb0: MAC a2:88:50:14:cc:a8
[ 1.677398] usb0: HOST MAC 9e:60:d9:19:17:78
[ 1.681762] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 1.688476] g_ether gadget: g_ether ready
[ 1.692565] musb_hdrc musb_hdrc: MUSB HDRC host driver
[ 1.698089] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2
[ 1.706146] hub 2-0:1.0: USB hub found
[ 1.710021] hub 2-0:1.0: 1 port detected
[ 1.714599] mice: PS/2 mouse device common for all mice
[ 1.720977] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/
input0
[ 1.731872] i2c /dev entries driver
[ 1.736480] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 1.743621] device-mapper: uevent: version 1.0.3
[ 1.749450] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
[ 1.758514] device-mapper: multipath: version 1.1.1 loaded
[ 1.764099] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.771850] sdhci: Secure Digital Host Controller Interface driver
[ 1.778106] sdhci: Copyright(c) Pierre Ossman
[ 1.785644] No device for DAI tlv320aic23
[ 1.872009] No device for DAI omap-mcbsp-dai-0
[ 1.876495] No device for DAI omap-mcbsp-dai-1
[ 1.881011] No device for DAI omap-mcbsp-dai-2
[ 1.885498] No device for DAI omap-mcbsp-dai-3
[ 1.890014] No device for DAI omap-mcbsp-dai-4
[ 1.894531] No device for DAI omap-mcpdm
[ 1.898468] Not OMAP3 EVM!
[ 1.901184] Not OMAP3517 / AM3517 EVM!
[ 1.904998] OMAP3 Beagle/Devkit8000 SoC init
[ 1.911163] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[ 1.921020] ALSA device list:
[ 1.924041] #0: omap3beagle (twl4030)
[ 1.930084] TCP cubic registered
[ 1.934906] NET: Registered protocol family 10
[ 1.941864] lo: Disabled Privacy Extensions
[ 1.950134] NET: Registered protocol family 17
[ 1.954925] ThumbEE CPU extension supported.
[ 1.961853] Power Management for TI OMAP3.
[ 1.977844] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 1.986541] registered taskstats version 1
[ 1.991027] fbcvt: 1024x...@60: CVT Name - .786M3-R
[ 1.996093] omapfb omapfb: failed to parse vram parameter
[ 2.025970] Console: switching to colour frame buffer device 128x48
[ 2.046936] regulator_init_complete: incomplete constraints, leaving VDAC on
[ 2.058227] usb 1-1: new high speed USB device using ehci-omap and address 2
[ 2.217468] hub 1-1:1.0: USB hub found
[ 2.221740] hub 1-1:1.0: 4 ports detected
[ 2.511840] usb 1-1.1: new low speed USB device using ehci-omap and address 3
[ 2.589630] eth0: link down
[ 2.592681] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.598266] ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 2.800415] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 2.806182] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 2.894653] usb 1-1.2: new low speed USB device using ehci-omap and address 4
[ 3.605163] Sending DHCP requests .
[ 4.612884] DHCP/BOOTP: Ignoring delayed packet
[ 6.230133] ., OK
[ 6.246215] IP-Config: Got DHCP answer from 192.168.128.1, my address is 192.168.128.48
[ 6.255035] IP-Config: Complete:
[ 6.258148] device=eth0, addr=192.168.128.48, mask=255.255.255.0, gw=192.168.128.1,
[ 6.266296] host=192.168.128.48, domain=devicevm.com.cn, nis-domain=(none),
[ 6.273803] bootserver=192.168.128.1, rootserver=192.168.128.44, rootpath=
[ 6.285034] md: Waiting for all devices to be available before autodetect
[ 6.291870] md: If you don't use raid, use raid=noautodetect
[ 6.298919] md: Autodetecting RAID arrays.
[ 6.303131] md: Scanned 0 and added 0 devices.
[ 6.307617] md: autorun ...
[ 6.310485] md: ... autorun DONE.
[ 6.314147] Looking up port of RPC 100003/2 on 192.168.128.44
[ 6.356933] Looking up port of RPC 100005/1 on 192.168.128.44
[ 6.522796] VFS: Mounted root (nfs filesystem) on device 0:14.
[ 6.528900] Freeing init memory: 260K
Welcome to MeeGo
[ OK ]
MeeGo release 1.0.90 (MeeGo)
Kernel 2.6.35.5-x4.1 on an armv7l
localhost.localdomain login:
_______________________________________________
MeeGo-dev mailing list
[email protected]
http://lists.meego.com/listinfo/meego-dev
