Errol,
I dont know a lot about my carbs expect what I have said,and their is
heaps of bits inside that are blocked off and even some bits have be
bronzed up and redrilled.
It was the guy at the carb shop that pionted this out to me when i got
them recon'd,his eyes where haning out and he said these are prity
worked carbs and its no wounder they are better than 45mm ones.
I sopose they work well since the inlet mani is 40mm and so is the inlet
ports in the head.
He said 48 or bigger would make a difference.
They were on the car when I got it so I'll stick with them(for now)
Malcolm
>
> Malcom
> Thats why webers have progression circuits and main circuits. The
> progression circuit works at up to approximately 25 degrees buterfly
> angle
> (Those little holes below the brass cap). The main circuit is engaged
> when
> the air velocity through the auxiliary venturis is sufficiently high
> to
> pull fuel through the main jet emulsion tube circuit. You can change
> when
> the main circuit comes in by changung the auxiary vents. 3.5's come in
> early 4.5's are common useage and 5.0's bring the mains in later.
> You should be able to have the engine running perfectly at all rev
> ranges,
> idle , progression(light load) and wide open throttle.
> If you tried using 45's with 40mm chokes you would have more control
> of
> your mixture at lower speeds on the main circuit and make tuning much
> easier.
> Cheers
> Feral Errol.
> ----------
> > From: malcolm cooper <[EMAIL PROTECTED]>
> > To: [EMAIL PROTECTED]
> > Subject: Re: Idle mixtures on DCOE weber
> > Date: Wednesday, March 15, 2000 4:17
> >
> > Daniel ,
> > I'm pulling my 40's to bits in the next few days to get them
> polished
> > and chromed(if it can be done)I'll report back with a full jet size
> of
> > them if they have numbers on bits.
> > but I know they are not std and they have no chokes so what bits are
> in
> > mine might not work in yours?.
> > I have tried 45's on it and the 40's are so much better.
> > But I think the no chokes is the ticket 40mm all the way through,I
> think
> > the 45's had 32 chokes so that makes them smaller than my 40's?.
> >
> > anyway running rich is cool nothing wrong with sitting at the lights
> > puffing black smoke out,as long as you can clear it on take off.
> > I tune them to be running clean at around 100Mph.
> > Tune them to be leanlish around town and when you get out on the
> open
> > road at speed you will burn holes in your pistions.
> >
> > Malcolm
> > >
> > > Can anyone on the list please help me, the idle mixture on my 16
> is
> > > too rich, I tried the idle mixture screws but they don't do
> anything
> > > as the jets are the wrong ones they are a 50 something (nothing
> else
> > > on the jet sorry), anyway I was told to put 45f9 jets in, will
> this
> > > fix it or cause more problems, the car was dyno tuned so when its
> on
> > > the main jets it is fine, will changing the idle jets effect this?
> Or
> > > could the problem be something else?
> > >
> > > Thanks
> > >
> >
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------
