although I can't tell you what the problem is i can tell you that if you
need to replace it buy a z20 timming kit ( bout $90) comes with chain and
tensioners. and have a few links removed from the timming chain ( the place
I bought mine did it on the spot. ) and comes with all gasekets needed
 except sump).,

----- Original Message -----
From: David Head <[EMAIL PROTECTED]>
To: OZDAT <[EMAIL PROTECTED]>
Sent: Thursday, March 16, 2000 11:39 AM
Subject: Timing Chain ?


> Hi all,
>  well the Z had been running nicely, but now it seems its cracked the
shits again.
> It sounds like a diesel truck and im none to happy. So i pulled off the
rocker cover
> and low and behold the timing chain seems fairly slack. The slackness is
on either
> side of the chain depending which way the crank / cam are facing.
> My question is, is this normal, when i put the head etc back on i can't
> remember if it was or not.
> I checked other things such as valve clearances and they seem right so im
> putting it down to the chain. I also checked the guides and they are still
> tight, i just don't wanta rip off the timing case and the crank pully etc
if
> it is not the case.
> Any suggestions ?
> dave
>
>
> DATZ18
> Victoria - Always On Boost
>
>
> --membersozdat-------------------------------------------------------
> OZDAT Mailing List   Please Note:-
> Send (un)subscribe requests to  [EMAIL PROTECTED]
> Send  submissions to  [EMAIL PROTECTED]
> No unauthorised redistribution of this email
> http://www.datascribe.com.au/ozdatonline/index.htm
> http://www.datascribe.com.au/ozdatonline/listindex.html
> ---------------------------------------------------------------------
>

--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------

Reply via email to