to be honest with ya mate that sounds like my car when the camber and caster
lower control arm bushes etc were fukt got em replaced very nice afterwards
chek ur bushes id say unless they all new
>From: Albs <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: [EMAIL PROTECTED]
>Subject: brake repairs
>Date: Thu, 23 Mar 2000 22:26:10 +0800
>
>on my 1600 the front struts are off a stanza and i have a few questions
>regarding them:
>firstly how much better would be 240k struts be (braking etc)
>
>is the camber they produce (when in a 1600) any good for road handling (it
>seems to be very negitive)
>
>do 240k struts sit on a different camber angle from stock 1600 struts and
>if so how good it it
>
>at the moment when i brake the car pulls to the right badly so either the
>drivers side pistion is'nt returning (so it partly stays clamped) which
>would be indercated by steeing pulling to one side (which it is'nt) or the
>passanger side is sticking and if so how hard is to reapir (like can it be
>done on a saturday with no problems or is it hassels galore
>
>and when the car is moving it seems to be very floaty like it's got some
>one else steering the back wheels could it be the rear bushes or is ti the
>stanza struts causing the problem (bad camber) the the toe is spot on and I
>have'nt got adjustable caster rods (radius rods)and i don't believe there
>bent either
>thanks in advance
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------
