How is your fuel pump wired? Does it go to the ECU? I have a Factory z18
setup in my datto with no probs like that. I dont have my fuel pump wired
to the computer because it wasn't on the wiring diagram.( maybe pin 10???)
Please let me know more about how you've wired it and we should be able to
sort you problem.
Regards,
Pete
----------
From: Andrew Peters <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: wiring troubles
Date: Monday, 27 March 2000 19:45
hi all, im having a bit of a problem with a z18et 510, it is all standard,
ie comp..., the problem was that when the key was turned to on, then back
to off, without starting the fuel pump would still run, and to kill it you
needed to start and stop the motor. anyway we didnt get a chance to look at
it as we were fixing other things, but now when you start the car and turn
the key off the car still runs, the only way to kill it is to remove a
battery lead. so checking a bit of wiring i found that after the battery
has been dis/reconnected everything is right, but as soon as you turn the
key to 'on' evrything gets power as it should, but when the key is turned
off the whole lot still has power, as though it thought the switch was
still on. so with the switch removed there is still power everywhere, so
its not a dodgy switch, i have no idea unless there is a faulty relay or
something in the computer, or the way the computer was wired that isnt
right???
has anyony ever seen anything like this or have any ideas???
thanks
andrew
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------
