Errol,
So the 4mm plate just touches the steering box, not connects to the box?
I may be confused.
Thanks,
Pete.
----------
> From: Errol Smith <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Re: Steering box brace
> Date: Saturday, 13 May 2000 7:22
>
> Michael,
> I make up a 4 mm flat steel strap to fit on the steering box bolt closest
> to the inner guard. Plate the wheel well side of the inner guard with a
> piece of approximately 75mm x 75mm x 2 mm sheet as reinforcing with the
> plate centred as close as possible to the where the strap will make
contact
> at the closest point. Mark up and drill a hole through the reinforcing
and
> then fit the steel strap. It makes a big difference!
> Cheers
> Feral Errol
>
> ----------
> > From: Michael Cassidy <[EMAIL PROTECTED]>
> > To: [EMAIL PROTECTED]
> > Subject: Steering box brace
> > Date: Saturday, May 13, 2000 1:07
> >
> > Has anyone built one of these? Or know where i can get one ? Price?
> > My steering has crazy amount of play cos the steering box just twists.
> >
> > Michael
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
