Hi David,
The easiest way to get it out is to drill a hole down the centre. (not all the way) !! and get yourself a set of "Easy Outs".
These things look a little like a drill bit, but are taped and the spirral runs in the opposite direction to a drill bit. What you do is insert the "Easy Out" that will fit into the hole (just tap it in a little bit) and simply put a small shifter on the end and unscrew the bolt out.
I hope this will help you,
Jeff
-----Original Message-----
From: David Costello [SMTP:[EMAIL PROTECTED]]
Sent: Wednesday, 21 June 2000 13:57
To: Online Datsun Club
Subject: slipping bolt heads
�
anyone know how I can remove a bolt that has had all the edges rounded on the head?
�
3 of the tappet cover bolts won't come off the socket just slips on them
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
