Sounds like logic to me too. But check out this link. This dude has put it
on back to front... I wonder if he's getting air bubbles??
http://www.rp.csiro.au/~ksmart/dsd/projectsr20.html
Then again, the S14 manual says the inlet is an outlet... and the outlet is
an outlet...
The manual also shows the thermostat where the inlet should be...
I suppose the real question is.. "Is too much information dangerous?"
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Luke Clough
Sent: Wednesday, July 26, 2000 7:17 AM
To: [EMAIL PROTECTED]
Subject: Re: SR20 water hoses
My response to that would be that the water would be pumped from the bottom
of
the motor (so that it always has a solid head of water to pump from ie no
air)
to the top so the water outlet would be at the top (regardless of which side
of
the motor) and should be connected to the top of the radiator and vice versa
for
the bottom. Though I haven't got an sr20 yet.
Luke Clough
Geordie Smith wrote:
> Just a dumb question.
>
> In every magazine I have picked up, the SR20's that have been installed
have
> the hoses taking water from the motor to the radiator on the passenger
side
> top and of course with the inlet to the motor going from the bottom right
> driver's side.
>
> While examining the S14 workshop manual, the hoses are to go the other way
> around...
>
> YIKES.. HELP.. somebody....
>
--
Buck...
_______________________
Luke Clough
Monash University
internal 56219
external 990 56219
<Corrupted Inc.>
_______________________
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
