Yep, It appears that in 2 instances in the workshop manual that they call
the inlet and outlet (That's the one with the thermostat) and they call the
outlet an outlet...
Then I read teh page before that, and it shows a diagram of water flow
through the motor and it is definately the driver's side which is the inlet
to the motor...
thanks..
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Peter
Sent: Tuesday, July 25, 2000 8:31 PM
To: [EMAIL PROTECTED]
Subject: Re: SR20 water hoses
Geordie
You are correct in what you said, when looking at the motor the top right
hand
side is the top hose to the radiator and the left bottom hose is the bottom
one, I have the S14 in my 1600 and that is the right way around
Peter
Geordie Smith wrote:
> Just a dumb question.
>
> In every magazine I have picked up, the SR20's that have been installed
have
> the hoses taking water from the motor to the radiator on the passenger
side
> top and of course with the inlet to the motor going from the bottom right
> driver's side.
>
> While examining the S14 workshop manual, the hoses are to go the other way
> around...
>
> YIKES.. HELP.. somebody....
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
