sounds like your front brake callipers may be sticking
>Johno
>One thing to check, that your master cylinder piston is travelling all the
>way back to its proper rest position. This allows the compensating port in
>the MC to open releasing pressure from the system. This could be caused by
>the push rod being too long for the new booster position.
>Cheers
>Feral Errol
>----------
>From: Noel Johnston <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Binding Brakes (please help)
>Date: Wednesday, August 09, 2000 6:11
>
>Fellow Listers,
> Please help me, I've just put a booster on my 510 &
>front brakes are binbing all the time while driving. The setup is:
> Bendix Masta Vac Booster (610)
> Nabco 3/4 Dual Master Cylinder (610)
> Proportioning Valve (610)
> Single Spot Calipers front (200B SX)
> Rear Drums (standard 510)
>
>Brakes have been bled & no air in system, have excellent pedal & stopping,
>but it seems that the brakes won't realease properly.
>Any help much appreciated !!!
>
>Johno
>Wodonga Vic.
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
